From: Bill Hill (bhill@xxxxxxxxxx)
Date: Tue Apr 23 2002 - 22:47:40 GMT-3
>From config mode, do a
DLSW DISABLE
NO DLSW DISABLE
This will restart the DLSW process and restart the peer connections.
-----Original Message-----
From: Steven Owen [mailto:trueccie@yahoo.com]
Sent: Tuesday, April 23, 2002 9:32 PM
To: Harish DV/peakxv
Cc: ccielab
Subject: Re: how to clear a dlsw peer connection?
I don't mean to clear a dlsw circuit .
what i mean is when you "show dlsw peer"
you can see your remote peer,at that time dlsw circult
could be built or not yet.
I just want to know how to clear the "PEER" relation,
not "CIRCUIT".
Thanks.
----- Original Message -----
From: "Harish DV/peakxv" <harish.dv@peakxv.net>
To: "steven owen" <trueccie@yahoo.com>
Cc: "ccielab" <ccielab@groupstudy.com>; <nobody@groupstudy.com>
Sent: Wednesday, April 24, 2002 2:12 AM
Subject: Re: how to clear a dlsw peer connection?
>
> Use " Clear dlsw circuits < circuit id>
>
>
> Regards,
>
> Harish D V
>
>
>
>
> steven owen
> <trueccie@yahoo.c To: ccielab <ccielab@gro
upstudy.com>
> om> cc:
> Sent by: Subject: how to clear a dlsw
peer connection?
> nobody@groupstudy
> .com
>
>
> 04/23/2002 10:02
> AM
> Please respond to
> steven owen
>
>
>
>
>
>
> Is there any command to clear a dlsw peer connection?
> now i just shut down the interface which local peer
> refers ,then no shut it .It's not a good way.
> If it has two remote peers ,how to clear only one of
> them?
>
>
> Thanks.
>
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:58:18 GMT-3