From: Alex Paulino (Alex@xxxxxxxxx)
Date: Tue Apr 23 2002 - 19:30:52 GMT-3
> hi all, following this documment
http://www.cisco.com/warp/public/cc/pd/ibsw/ibdlsw/tech/dls3_rg.htm, The cost
configured on the dlsw remote peer command overrides any cost value learned
from another devices dlsw local peer command. But, in my environment, i have:
>
> R0 -----> peer------ R1 (local cost=2)
> R0 ------> peer----- R3 (local cost=4)
>
> If i type "show dlsw capa" on R0 router, the R1 has the cost=2 and R3=4
(learned from local cost assign in remote peer) --> oK
> If i insert a new router making peer with this same R1 and R3 routers, and,
i wanna this new router (R2) has the priority cost to R3, which should be the
configuration?
> I tried:
> R2)
> dlsw local-pee peer-id 100.2.2.2
> dlsw remote-peer 0 tcp 100.1.1.1 cost 5 --> peer with R1
> dlsw remote-peer 0 tcp 100.3.3.3 cost 1 ---> peer with R3
> In "show dlsw capa" the local cost assign in R3 and R1 still are appearing(4
and 2). Do it is a normal situation? My configuration is wrong? what can i do
for to check this new cost different from local cost?
>
> thanks again
>
> alex
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:58:18 GMT-3