From: Craig Columbus (Craig.Columbus@xxxxxxxxxxxxxxxxxxxxxx)
Date: Mon Apr 22 2002 - 18:57:12 GMT-3
I found another link http://www.cisco.com/warp/customer/707/ios_804.html
that shows router-to-router with a DHCP address. Combining the documents,
it seems like this will work. I'll post the conclusion once I've tested it.
A great big thanks to all who responded.
Craig
At 05:25 PM 4/22/2002 -0400, you wrote:
>Ok, I found this link
>http://www.cisco.com/warp/customer/110/dynamicpix.html for PIX-PIX when one
>of the PIX has a DHCP address. Does anyone know whether this same setup
>will work for router-PIX? (I'm going to test later, but if someone can
>save me a headache, it's certainly appreciated.
>
>Thanks again,
>Craig
>
>At 04:45 PM 4/22/2002 -0400, you wrote:
> >Is it possible to setup a router to PIX VPN when the router is obtaining a
> >dynamic WAN interface address (in this case ISDN dial-up)?
> >If so, has anyone done this? How do you define the peer when you don't
> >know the peer address? Is it possible to allow any host to create a tunnel
> >provided that the pre-shared key is known?
> >
> >Thanks in advance for your comments!
> >
> >Craig
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:58:17 GMT-3