From: Tarek Sabry (tsabry@xxxxxxxxxxxxxxxxxxx)
Date: Mon Apr 22 2002 - 16:43:34 GMT-3
For all those who are asking about the ouptput of "deb ip ospf mon", here
2:02:27: OSPF: Schedule SPF in area 0
Change in LS ID x.x.x.x, LSA type R,
where x.x.x.x is the loopback of the DDR neighbor (its router id)
It just loses the neighbor once the circuit goes down. But I thought with
Demand Circuit it should NOT!!!! Arrgh.
Thanks again
Tarek
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com]On Behalf Of
Tarek Sabry
Sent: Monday, April 22, 2002 1:55 PM
To: ccielab@groupstudy.com
Subject: Demand Circuit flapping
Hi
I would appreciate immediate help as I only have 1 day left!
I just can't seem to get my OSPF demand circuit to stop flapping. Once it
goes down it goes up again. Someone by the name of Jim seems to have found a
fix for this last month. I can't seem to have his full e-mail in the
archives. I did try to even remove all redistributions, and used "no peer
neighbor-route". Nothing seems to fix it. I'm using dialer profiles. What is
the issue here? An extra adjacency forms to the same router. Is that normal?
I mean once the ISDN establishes the circuit I have 2 adjacencies going to
the same end point.
You can respond to me in private if you think this won't benefit the masses.
Thank you much
Tarek
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:58:17 GMT-3