From: yakout esmat (yesmat@xxxxxxxxxxxxxx)
Date: Mon Apr 22 2002 - 10:03:05 GMT-3
Right.
Origin External or Internal depends on where you are originating the
aggregate, if you originate the aggregate from an IBGP neigbor then the agg
will have origin (i), if you originate the agg from an EBGP neighbor the
origin will have () which means External.
Ya
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com]On Behalf Of
steven.j.nelson@bt.com
Sent: Monday, April 22, 2002 10:17 PM
To: vincentzhang@yahoo.com; ccielab@groupstudy.com
Subject: RE: Aggregate route in BGP
Vincent,
The aggregate address by default removes the AS path information, the as-set
option allows the agregate address to be advertised retaining the AS Path
information, as for whether it is External or internal depends on where you
advertise the aggregate to.
HTH
Steve
-----Original Message-----
From: VZ [mailto:vincentzhang@yahoo.com]
Sent: 22 April 2002 12:53
To: ccielab
Subject: Aggregate route in BGP
Hi,
When you configure the aggregate-address x.x.x.x x.x.x.x, you have
option of "as-set". What I want to know is, what "as-set" gives to the
aggregate route? as path only, or something else too?
Does aggregate route has attribute of "internal" or "external"?
If all specific routes are IBGP routes, is it mean that the aggregate
route is IBGP route too? or If EBGP ,....?
Thanks, V
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:58:16 GMT-3