From: kris.keen@xxxxxxxxxx
Date: Sun Apr 21 2002 - 22:03:32 GMT-3
Both links dont work :)
hehe
-----------------------------------------------------------------
Kris Keen - CNE, CCNA, CCNP
Network Support Specialist - Network Systems
Aon Risk Services Australia Limited
(612) 9253 7272
0404862970
E: Kris.Keen@aon.com.au
Jason Sinclair
<sinclairj@powert To: "'Ahmed Mamoor Amimi'" <mam
oor@ieee.org>, Nigel Taylor
el.com.au> <nigel_taylor@hotmail.com>, cciela
b@groupstudy.com
Sent by: cc:
nobody@groupstudy bcc:
.com Subject: RE: access-expression
!
22/04/2002 10:34
AM
Please respond to
Jason Sinclair
1. Go to http://www.cisco.com <http://www.cisco.com>
2. Select Technical Documents
3. Select 12.2 from the dropdown box labelled Cisco IOS Software
4. Select configuration guides and command references
5. Select Cisco IOS Bridging and IBM Networking Configuration Guide,
Release 12.2 <fibm_c/index.htm>
6. Select Bridging <bcfpart2/index.htm>
7. Select Configuring Source-Route Bridging <bcfsrb.htm>
The document contains access-expression info under the section related to
"securing the SRB network".
Now the exact link is
http://www.cisco.com/univercd/cc/td/doc/product/software/ios122/122cgcr/fibm
_c/bcfpart1/bcfsrb.htm
<
http://www.cisco.com/univercd/cc/td/doc/product/software/ios122/122cgcr/fib
m_c/bcfpart1/bcfsrb.htm>
Regards,
Jason Sinclair CCIE #9100
Manager, Network Support Group
POWERTEL
Ground Level, 55 Clarence Street,
SYDNEY NSW 2000
AUSTRALIA
office: + 61 2 8264 3820
mobile: + 61 416 105 858
* sinclairj@powertel.com.au
-----Original Message-----
From: Ahmed Mamoor Amimi [mailto:mamoor@ieee.org]
Sent: Monday, 22 April 2002 10:16
To: Nigel Taylor; ccielab@groupstudy.com
Subject: Re: access-expression !
I know this link.....
ok if i want to seach from 12.2 IOS then where to go....
bridging ------- ibm---------rsrb---- then ????
let me know the exact link .... i dont want to search for it
And i guess ur link is from 11.0 IOS guide
-Mamoor
----- Original Message -----
From: Nigel Taylor <nigel_taylor@hotmail.com>
To: <mamoor@ieee.org>; <ccielab@groupstudy.com>
Sent: Monday, April 22, 2002 2:50 AM
Subject: Re: access-expression !
> Ahmed,
>
> This is from 12.2 but it should all be the same
..
>
>
http://www.cisco.com/univercd/cc/td/doc/product/software/ios11/rbook/rsrb.ht
m#xtocid209861
>
> Nigel
>
> >From: "Ahmed Mamoor Amimi" >Reply-To: "Ahmed Mamoor
Amimi" >To:
> >Subject: access-expression ! >Date: Mon, 22 Apr 2002
02:48:25 +0500 >
> >hey ! where i can find the access-expression section
under 12.1 IOS
> guide in >the doc. > > >-Mamoor
>
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:58:15 GMT-3