From: Lupi, Guy (Guy.Lupi@xxxxxxxxxxxxx)
Date: Sun Apr 21 2002 - 20:46:37 GMT-3
Go to IOS 12.1 Configuration Guides and Commmand Reference, go to Cisco IOS
Bridging and IOS Command Reference Vol. 1, Bridging, Source Route Bridging,
and it is the first command there, lists all the operators and possible
keywords.
~-----Original Message-----
~From: Ahmed Mamoor Amimi [mailto:mamoor@ieee.org]
~Sent: Sunday, April 21, 2002 8:16 PM
~To: Nigel Taylor; ccielab@groupstudy.com
~Subject: Re: access-expression !
~
~
~I know this link.....
~
~ok if i want to seach from 12.2 IOS then where to go....
~
~
~bridging ------- ibm---------rsrb---- then ????
~
~let me know the exact link .... i dont want to search for it
~
~
~And i guess ur link is from 11.0 IOS guide
~
~-Mamoor
~
~
~
~
~
~----- Original Message -----
~From: Nigel Taylor <nigel_taylor@hotmail.com>
~To: <mamoor@ieee.org>; <ccielab@groupstudy.com>
~Sent: Monday, April 22, 2002 2:50 AM
~Subject: Re: access-expression !
~
~
~> Ahmed,
~>
~> This is from 12.2 but it should all be the same ..
~>
~>
~http://www.cisco.com/univercd/cc/td/doc/product/software/ios11/
~rbook/rsrb.ht
~m#xtocid209861
~>
~> Nigel
~>
~> >From: "Ahmed Mamoor Amimi" >Reply-To: "Ahmed Mamoor Amimi" >To:
~> >Subject: access-expression ! >Date: Mon, 22 Apr 2002
~02:48:25 +0500 >
~> >hey ! where i can find the access-expression section under 12.1 IOS
~> guide in >the doc. > > >-Mamoor
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:58:15 GMT-3