From: Lupi, Guy (Guy.Lupi@xxxxxxxxxxxxx)
Date: Sat Apr 20 2002 - 18:14:04 GMT-3
I am having a little trouble getting rsvp with voip to work. I have a setup
like below, all interfaces have rsvp enabled, some have more bandwidth
alloted than others, but all of them have a max single reservation of
10KBps. I make a call from r8 to r7 and can see the path messages from the
calling router (r8), but the called router doesn't seem to send the
reservation messages. Also, is there a way to define the amount of
bandwidth the VOIP peers want to reserve? I pasted my dial peer
configurations below, thanks.
r8--------r2---------r6---------r5----------r7
R8
dial-peer voice 1 pots
destination-pattern 14085...
port 1/0/0
!
dial-peer voice 2 voip
destination-pattern 83222...
req-qos controlled-load
acc-qos controlled-load
session target ipv4:7.7.7.7
!
num-exp 2... 83222...
R7
dial-peer voice 2 voip
destination-pattern 14085...
req-qos controlled-load
acc-qos controlled-load
session target ipv4:8.8.8.8
!
dial-peer voice 1 pots
destination-pattern 83222...
port 1/0/0
!
num-exp 5... 14085...
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:58:14 GMT-3