From: Bauer, Rick (BAUERR@xxxxxxxxxxx)
Date: Fri Apr 19 2002 - 08:51:15 GMT-3
There is a difference, "dlsw mac-address" is a dlsw static entry to a remote
peer (for outgoing traffic) and "dlsw icanreach mac-address" is a static
that refers to local reachablity and is advertised to peers during the
capabilities exchange (for incoming traffic). HTH....
-----Original Message-----
From: Alex Rhyubisef [mailto:foselkr@yahoo.co.kr]
Sent: Friday, April 19, 2002 3:08 AM
To: ccielab@groupstudy.com
Subject: about dlsw configuration.
hi, all
i have a question about dlsw.
is there any difference about following commands?
dlsw mac-addr 1000.5A12.3456 remote-peer int se0/0
dlsw icanreach mac-addr 1000.5A12.3456
mask ffff.ffff.ffff
i think these commands are the same result.
am i incorrect?
thanks.
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:58:13 GMT-3