From: Jeff Szeto (jytszeto@xxxxxxxxxxx)
Date: Fri Apr 19 2002 - 02:50:11 GMT-3
Hi Christine,
Thanks for your respones.
I think that my bad english makes you misunderstand the question.
I say it this way. My company's router has a public ip, say 1.1.1.1, and is
connecting to the internal network 192.168.0.x/24. The internal network has
3 different servers: ftp (192.168.0.1), telnet (192.168.0.2) and http
(192.168.0.3).
What I want to do is: If I ftp 1.1.1.1 from outside, eg my home, the router
connect me to the ftp server. On the other way, if I telnet 1.1.1.1, the
router will then connect me to the telnet server.
Can I do this with the router or I need other equipment?
Thank you very much.
Jeff
----- Original Message -----
From: <cdmurray@statestreet.com>
To: Jeff Szeto <jytszeto@hotmail.com>
Sent: Friday, April 19, 2002 1:32 PM
Subject: Re: OT: Port Address Translation
>
> Jeff
> Here's one way of doing it:
> =========================================================
> NAT sample
>
> ip nat pool TEST 192.180.253.66 192.180.253.66 netmask 255.255.255.240
> ip nat inside source list 10 pool TEST overload
>
> interface Ethernet0
> ip address 169.191.10.89 255.255.255.240 secondary
> ip address 192.180.253.65 255.255.255.240
> ip nat inside
>
> interface Serial0
> ip address 10.227.200.5 255.255.255.252
> ip nat outside
>
> access-list 10 permit 169.191.10.0 0.0.0.255
> ==============================================
>
>
>
> Regards,
> Christine Murray
> Ph: 612-93236124
> cdmurray@statestreet.com
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:58:12 GMT-3