From: Hansang Bae (hbae@xxxxxxxxxx)
Date: Thu Apr 18 2002 - 22:25:24 GMT-3
At 09:18 AM 4/18/2002 -0700, Jaspreet Bhatia wrote:
> Thanks for your suggestion .I did try it this way as per
the Groupstudy archives and a message by Brian Dennis said the same thing . But
I am getting this message when I try to telnet into the lines vty 3 or 4
>Phoenix1#telnet 170.10.23.1 3001
>Trying 170.10.23.1, 3001 ... Open
>User Access Verification
>Username: jas1
>Password:
>Password OK
>Queued on rotary line group 1.
>The rotary line group you attempted to access is full.
>You have therefore been placed in a queue for the next
>available line in this group.
>You may exit the queue by terminating the telnet connection
>You are now position 1 in the queue.
>
> and then the router just hangs there . ANy ideas ?
Can you show us your config?
hsb
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:58:12 GMT-3