From: Nick Shah (nshah@xxxxxxxxxxxxxx)
Date: Thu Apr 18 2002 - 06:18:23 GMT-3
ok, if you have a token segment and ether segment *on the same router* then
you do need SR/TLB enabled on the router.
However if you have one router with token ring segment on it connected via
wan / Serial to the other router having Ether segment on it, *you dont need
to enable SR/TLB*
hth
Nick
-----Original Message-----
From: Roger Schotsal <schotsal@hotmail.com>
To: ccielab@groupstudy.com <ccielab@groupstudy.com>
Date: Thursday, 18 April 2002 5:00
Subject: DLSW easy question
>My lab is monday & I am starting to see double. Need a confirmation on
this
>- when you add ethernet segment & token ring segments to a dlsw
>configuration on a router - conectivity between the segments is enabled
also
>- right ? That is translational bridging is not requred for a host on the
>ethernet to talk to a host on the token ring - right ?
>
>Thanx,
>Roger
>
>
>
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:58:12 GMT-3