From: steven.j.nelson@xxxxxx
Date: Wed Apr 17 2002 - 04:30:36 GMT-3
That is neat...
-----Original Message-----
From: kym blair [mailto:kymblair@hotmail.com]
Sent: 17 April 2002 01:17
To: kymblair@hotmail.com; HansenG@radiological.com;
ccielab@groupstudy.com
Subject: Re: FREEK Configs
George,
Here are the configs for setting up FREEK. If you choose bidirectional, as
the example below, you need to install on both ends (the DLCI will shut down
if you don't). Notice R6 has subinterfaces; if you set up FREEK on the
physical interface, you would need it on all remote FR routers. If you just
want to monitor one DLCI, then set it up on the subinterface for that one:
R6 (with subinterfaces):
map-class frame-relay FREEK
frame-relay end-to-end keepalive mode bidirectional
interface Serial1
no ip address
encapsulation frame-relay
interface Serial1.1 point-to-point
ip address 172.28.1.6 255.255.255.240
frame-relay class FREEK
frame-relay interface-dlci 614
R14 (without subinterfaces):
map-class frame-relay FREEK
frame-relay end-to-end keepalive mode bidirectional
interface Serial0/0
ip address 172.28.1.14 255.255.255.240
encapsulation frame-relay
frame-relay class FREEK
frame-relay map ip 172.28.1.6 146 broadcast
frame-relay map ip 172.28.1.14 146 broadcast
no frame-relay inverse-arp
Kym
----------------------------------------------------------
>From: "kym blair" <kymblair@hotmail.com>
>Reply-To: "kym blair" <kymblair@hotmail.com>
>To: HansenG@radiological.com, ccielab@groupstudy.com
>Subject: Re: Frame Relay PVC status
>Date: Tue, 16 Apr 2002 23:48:08 +0000
>
>George, how about FREEK:
>
>show frame-relay end-to-end keepalive interface serial 1.1 614
>
>HTH, Kym
>
>
>>From: "George Hansen" <HansenG@radiological.com>
>>Reply-To: "George Hansen" <HansenG@radiological.com>
>>To: <ccielab@groupstudy.com>
>>Subject: Frame Relay PVC status
>>Date: Tue, 16 Apr 2002 15:49:57 -0700
>>
>>I can think of two ways to track the status of an individual FR PVC. Does
>>anyone know of another way? I'd like to track when one PVC goes down but
>>the interface and some PVCs stay up.
>>
>>1) Show frame pvc #
>>compare "last time pvc status changed" counter to "pvc create time"
>>counter
>>2) logging buffer 8192 and debug frame events
>>
>>Thanks,
>>
>>George, CCIE #8546 R&S
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:58:11 GMT-3