From: Jaspreet Bhatia (jasbhati@xxxxxxxxx)
Date: Tue Apr 16 2002 - 18:29:53 GMT-3
David,
It is running 2.4(3) .That is the CAT OS version . It is
shown in the SW section .
At 04:06 PM 4/16/2002 -0500, Davis, David wrote:
>At the risk of sounding ignorant, is this switch running the CatOs version
>5.1 ?
>
>I believe that 5.1 is recommended for the CCIE lab, correct? (there are a
>lot of different versions on the "sh vers")
>
>Is what is refered to as the CatOs version the same as the "system
>bootstrap version"?
>
>
>WS-C2926 Software, Version McpSW: 2.4(3) NmpSW: 2.4(3)
>Copyright (c) 1995-1997 by Cisco Systems
>NMP S/W compiled on Nov 13 1997, 15:10:03
>MCP S/W compiled on Nov 13 1997, 15:23:29
>
>System Bootstrap Version: 5.1(2)
>
>Hardware Version: 2.8 Model: WS-C2926 Serial #: 007460181
>
>Module Ports Model Serial # Hw Fw Fw1 Sw
>------ ----- ---------- --------- ------ ------- ------- --------------------
>1 2 WS-X2926F 007460181 2.8 5.1(2) 4.3(4) 2.4(3)
>2 24 WS-X2926L 006831509 1.2 3.1(1) 2.4(3)
>
>Module DRAM FLASH NVRAM Used Available
>------ ------- ------- ------- ------- ---------
>1 32768K 8192K 256K 83K 173K
>
>
>Thanks,
>David Davis
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:58:10 GMT-3