From: Ahmed Mamoor Amimi (mamoor@xxxxxxxx)
Date: Tue Apr 16 2002 - 17:10:11 GMT-3
I have done this before between 2 nlsp sap filtering.
try using the "distribution-list in" not "distribution-list out" at the
router where after u want the filters.
-Mamoor
----- Original Message -----
From: MOLINA, MARTIN J *Internet* (PBI) <mm1343@pbi.net>
To: <neiby@ureach.com>; <ccielab@groupstudy.com>
Sent: Monday, April 15, 2002 11:56 PM
Subject: RE: IPX SAP filtering between NLSP routers
> That explains it. Thank you.
>
> -----Original Message-----
> From: John Neiberger [mailto:neiby@ureach.com]
> Sent: Monday, April 15, 2002 11:56 AM
> To: MOLINA, MARTIN J *Internet* (PBI); 'ccielab@groupstudy.com'
> Subject: Re: IPX SAP filtering between NLSP routers
>
>
> There is no solution that works 'between NLSP routers'. Since
> NLSP is link-state, all NLSP routers must have the same link
> state database.
>
> However, you can use a filter on the router that is
> redistributing from RIP or EIGRP into NLSP.
>
> HTH,
> John
>
>
>
> ---- On Mon, 15 Apr 2002, MOLINA, MARTIN J *Internet*
> (mm1343@pbi.net) wrote:
>
> > Group,
> > I found this issue in the archives with no solution. I am
> trying to filter
> > SAPS between 2 NLSP routers. I have tried distribute-sap-list
> and ipx
> > input-sap-filter with no success. Is anyone aware of a
> solution that works?
> > Thanks in advance.
> >
> > Martin Molina
> > Senior Network Engineer
> > Pacific Bell Internet Services
> > CCNP CCDP
> > desk: 925 973-7774
> >
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:58:10 GMT-3