From: Krucker, Louis (louis.krucker@xxxxxxxxxxx)
Date: Tue Apr 16 2002 - 16:18:45 GMT-3
Use the set cam command set to add entries into the CAM table and set the
aging time for the CAM table.
set cam {dynamic | static | permanent} {unicast_mac | route_descr} mod/port
[vlan]
set cam {static | permanent} {multicast_mac} mod/ports.. [vlan]
set cam agingtime vlan agingtime
-----Original Message-----
From: Alex Paulino
To: ccielab@groupstudy.com
Sent: 16.04.2002 19:58
Subject: Multicat MAC Address
Dear Friends, Does someone know how to set the static MAC address in the
cam table to Multicast address 239.1.2.3?
Tks
alex
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:58:10 GMT-3