From: sanjay (ccienxtyear@xxxxxxxxxxx)
Date: Tue Apr 16 2002 - 15:27:49 GMT-3
Folks,
I have a router that is running IGRP (the ethernet, serial and loopback) are
all configured with 129.45.50.X. The serial interface has a /30 mask and the
ethernet interface has a /29 mask. The loopback has a /29 mask also. This
router is a spoke in a 4 router HUB and Spoke setup.
I can ping the serial interface and see the subnet of the serial interface on
all the OSPF routers (after doing redistribution on the HUB). What I can't see
or am able tp ping is the ethernet interface that has a /29 mask. same deal
with the loopback
the router config (igrp part)
router igrp 100
network 129.45.0.0
!
I also did redistribute connected ---that didn't work either.
What are the possible solutions for this ? Secondary addresses ?
thanks in advance.
Sanjay
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:58:10 GMT-3