From: Annu Roopa (annu_roopa@xxxxxxxxx)
Date: Tue Apr 16 2002 - 13:03:27 GMT-3
Hi,
Just a doubt ? I thought the area range command is
only for inter OSPF areas on the ABR. So does the area
range command work on ASBR too ?? in which case it
wont summarize the routes to IGRP.
Let me know.Thanks
Annu
--- Muhamamd Durrani <dan_schaw@yahoo.com> wrote:
> Hi Tarek ,
>
> With Summary-Address you cannot re-distribute to
> other
> routing protocol . Its for the Summary Address for
> Ecternal Routes .
>
> I would rather say create a Summary Address with
> "Area
> range " commad on the router you want to summarized
> the addresses on, with the mask configured on the
> interfaces running IGRP. If the mask is now same as
> configured on IGRP interfaces than you wil not see
> the
> route on IGRP router .
>
> Another way that I could see is to create a static
> route on ASBR to NULL 0 and redistribute static into
> IGRP process ..but again the mask SHOULD match with
> interaces configured with IGRP .
>
>
> Let me know id I am wrong .
>
> Regards,
> Muhammad
>
>
> --- Tarek Sabry <tsabry@houston.sns.slb.com> wrote:
> > Hi
> >
> > I understand that there may be more than one way
> to
> > redistribute VLSM into
> > FLSM. However the only way that seems to work for
> me
> > when redistributing
> > OSPF into IGRP is the brilliant method suggested
> by
> > someone a little while
> > back, whereby I need to create an intermediate
> OSPF
> > process. I don't feel
> > comfortable with just this way though, because the
> > proctors may object to
> > it.
> >
> > So let's say we have a /26 network connected to
> the
> > OSPF side of the
> > redistributing router. Someone had suggested
> before
> > that a good way of
> > achieveing what I want would be to redistribute
> > connected into OSPF and
> > create a "summary-address" of a /24, and this
> route
> > would be redistributed
> > into IGRP with the rest of the OSPF routes.
> >
> > Is that supposed to work??? Well doesn't the
> > "summary-address" inject a
> > route INTO OSPF and not OUT OF it?? Also how come
> I
> > do not see any routes to
> > "Null 0" after I create my OSPF summary address?
> >
> > What are common gotchas for OSPF summaries??
> >
> > Thanks a lot
> > Tarek
> >
>
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:58:09 GMT-3