From: sanjay (ccienxtyear@xxxxxxxxxxx)
Date: Mon Apr 15 2002 - 14:11:54 GMT-3
Thanks for sharing that.
-Sanjay
----- Original Message -----
From: "Bauer, Rick" <BAUERR@toysrus.com>
To: <ccielab@groupstudy.com>
Sent: Sunday, April 14, 2002 6:49 AM
Subject: RE: VOICE Port ranges
> On the CD look under, Voice Products, IP Telephony Solutions, AVVID QOS
> Design, then Implementing a WAN. You will find the ports as well as some
> good design tools (i.e. bandwidth consumption charts, FRTS parameters,
VoFR
> VoATM, etc.) HTH....
>
> -----Original Message-----
> From: Scott Morris [mailto:swm@emanon.com]
> Sent: Saturday, April 13, 2002 11:35 PM
> To: 'sanjay'; ccielab@groupstudy.com
> Subject: RE: VOICE Port ranges
>
>
> H.323 specs...
>
> 16384-32767 = voice
> 32768-49151 = whiteboard
> 49152-66535 = video
>
> And 1720 is the H.225 negotiation. You are correct on the TCP/UDP
portions.
>
> Scott
>
> -----Original Message-----
> From: nobody@groupstudy.com [mailto:nobody@groupstudy.com]On Behalf Of
> sanjay
> Sent: Saturday, April 13, 2002 7:34 PM
> To: ccielab@groupstudy.com
> Subject: VOICE Port ranges
>
>
> Hi,
>
> What is the correct voice port ranges. I have seen some UDP 16384 to 16484
> and
> in some books it is from 16384 to 32000 something.
> When I am setting QOS for voice, I always chose UDP 16384 to 16484 and TCP
> 1720. Is this correct ?
>
> thanks,
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:58:08 GMT-3