From: Mike Billingsley (billingsley@xxxxxxxxxxxxx)
Date: Mon Apr 15 2002 - 10:42:20 GMT-3
I just did that lab and ran into the same issue. You need to use policy
routing, at the interface and globally. I can hit everything. Also, I did
not disable split horizon.
Good luck.
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com]On Behalf Of
Johnny Tsao
Sent: Saturday, April 13, 2002 10:49 PM
To: Ludwig Morales; ccielab@groupstudy.com
Subject: RE: OSPF Conectivity problem
I may be wrong but look into policy route, i'm assuming that the spoke can
reach the hub that's why you are getting the replies? but the spoke to
spoke are unreachable... I will have to test this but I remember working on
a lab that has this type of scenario...
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com]On Behalf Of
Ludwig Morales
Sent: Saturday, April 13, 2002 9:22 PM
To: ccielab@groupstudy.com
Subject: Fw: OSPF Conectivity problem
HI Everybody
I need a hand since i'm about to go nuts here, i'm doing NLI lab 2 OSPF NMBA
Issu, I have the fallowing scenario
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:58:08 GMT-3