RE: VOICE Port ranges

From: Bauer, Rick (BAUERR@xxxxxxxxxxx)
Date: Sun Apr 14 2002 - 10:49:58 GMT-3

• Next message: Ludwig Morales: "OSPF Authentication (Fatkid's LAB)"
• Previous message: li jian hua: "where to find a sample about OSPF per-interface authentication on www.cisco.com?"
• Maybe in reply to: sanjay: "VOICE Port ranges"
• Next in thread: steven.j.nelson@xxxxxx: "RE: VOICE Port ranges"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

   
On the CD look under, Voice Products, IP Telephony Solutions, AVVID QOS
Design, then Implementing a WAN. You will find the ports as well as some
good design tools (i.e. bandwidth consumption charts, FRTS parameters, VoFR
VoATM, etc.) HTH....

-----Original Message-----
From: Scott Morris [mailto:swm@emanon.com]
Sent: Saturday, April 13, 2002 11:35 PM
To: 'sanjay'; ccielab@groupstudy.com
Subject: RE: VOICE Port ranges

H.323 specs...

16384-32767 = voice
32768-49151 = whiteboard
49152-66535 = video

And 1720 is the H.225 negotiation. You are correct on the TCP/UDP portions.

Scott

-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com]On Behalf Of
sanjay
Sent: Saturday, April 13, 2002 7:34 PM
To: ccielab@groupstudy.com
Subject: VOICE Port ranges

Hi,

What is the correct voice port ranges. I have seen some UDP 16384 to 16484
and
in some books it is from 16384 to 32000 something.
When I am setting QOS for voice, I always chose UDP 16384 to 16484 and TCP
1720. Is this correct ?

thanks,

• Next message: Ludwig Morales: "OSPF Authentication (Fatkid's LAB)"
• Previous message: li jian hua: "where to find a sample about OSPF per-interface authentication on www.cisco.com?"
• Maybe in reply to: sanjay: "VOICE Port ranges"
• Next in thread: steven.j.nelson@xxxxxx: "RE: VOICE Port ranges"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:58:07 GMT-3