From: Ludwig Morales (lud.morales@xxxxxxxxxxxxxx)
Date: Sun Apr 14 2002 - 03:03:24 GMT-3
Yes!
I think it's as simple as there's no way for the spoke to reach each other,
if I do a debug frame-relay packet I get.
01:20:45: Serial0(I): dlci 151(0x2471), pkt type 0x800, datagramsize 96
01:20:46: Serial0:Encaps failed--no map entry link 7(IP).
01:20:48: Serial0:Encaps failed--no map entry link 7(IP).
01:20:50: Serial0:Encaps failed--no map entry link 7(IP).
01:20:52: Serial0:Encaps failed--no map entry link 7(IP).
01:20:54: Serial0:Encaps failed--no map entry link 7(IP).
what I think is that's why even when the spoke establish the adjacencies
with the DR (I force it to be the hub) when they try to reach another spoke
address the don't know how to reach the next hop (spoke serial int) but I
don't know any other way to do this than by using map statements.
I even got to thing that this guys (the one that did the lab) either are
asking for something else and I don't understand the question or really
don't know what they are doing.
Thanks a lot for your answer.
Regards,
Ludwig
----- Original Message -----
From: "Johnny Tsao" <johnnyt@netcat.com>
To: "Ludwig Morales" <lud.morales@codetel.net.do>; <ccielab@groupstudy.com>
Sent: Sunday, April 14, 2002 1:48 AM
Subject: RE: OSPF Conectivity problem
> I may be wrong but look into policy route, i'm assuming that the spoke can
> reach the hub that's why you are getting the replies? but the spoke to
> spoke are unreachable... I will have to test this but I remember working
on
> a lab that has this type of scenario...
>
> -----Original Message-----
> From: nobody@groupstudy.com [mailto:nobody@groupstudy.com]On Behalf Of
> Ludwig Morales
> Sent: Saturday, April 13, 2002 9:22 PM
> To: ccielab@groupstudy.com
> Subject: Fw: OSPF Conectivity problem
>
>
> HI Everybody
>
> I need a hand since i'm about to go nuts here, i'm doing NLI lab 2 OSPF
NMBA
> Issu, I have the fallowing scenario
>
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:58:07 GMT-3