From: anthony ohanusi (ohanusi@xxxxxxxxxxxxxxxxx)
Date: Sat Apr 13 2002 - 03:03:31 GMT-3
Hi Jeff,
can show the config with the ip addresss and frame relay parameters on your
interfaces.
Regards
At 06:13 AM 4/13/2002, you wrote:
>Hi,
>
>--f0/1--R1--s0/0--------FR-------s0-R2
>
>The serial interfaces are main interfaces
>Sparse-dense-mode is used in all interfaces
>R1 is the auto-RP and agent
>R1's f0/0 has join the group 230.0.0.1
>The problem is R2 cannot ping the group 230.0.0.1
>
>Hers's are the relevant config, please tell me what I am doing wrong.
>
>R1
>
>ip multicast-routing
>
>int s0/0
>ip pim nbma-mode
>ip pim sparse-dense-mode
>
>int f0/1
>ip igmp join-group 230.0.0.1
>ip pim sparse-dense-mode
>
>ip pim send-rp-announce Loopback0 scope 15 group-list 80
>ip pim send-rp-discovery scope 15
>
>access-list 80 permit 230.0.0.1
>
>R2
>
>ip multicast-routing
>
>int s0
>ip pim nbma-mode
>ip pim sparse-dense-mode
>
>When I show the mroute table of R1, I saw this:
>
>(*, 230.0.0.1), 00:00:06/00:00:00, RP 140.100.1.1, flags: SJCL
> Incoming interface: Null, RPF nbr 0.0.0.0
> Outgoing interface list:
> FastEthernet0/1, Forward/Sparse-Dense, 00:00:06/00:02:53
>
>It seems the outgoing interface does not include s0/0.
>
>Thank you in advance.
>
>Jeff
>
>
>
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:58:07 GMT-3