From: Joe Morabito (joe.morabito@xxxxxxx)
Date: Fri Apr 12 2002 - 02:12:59 GMT-3
I had a scenario where a client was not satisfied with their performance of a
128k line between two sites. So I decided to setup traffic shaping to see if
we could manage the traffic.
Setup basic traffic shaping - ISP Cir was 64k Peak was 128k (configured
bandwidth, timeslots 1-2)
So I setup a class with cir of 128k mincir of 64k and bc of 16k and applied to
appropriate interface.
We then proceeded to send a test file of about 7 mb to the other site, the
line choked and was actually a little slower. The interfaces even reset. The
memory was o.k. on the routers, both are 1601's.
Any ideas on why this would slow down the link and even reset the interfaces?
(they did come back up). I have since taken off traffic shaping.
Thanks.
-Joe
joe.morabito@cox.net
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:58:06 GMT-3