From: Larson, Chris (Contractor) (Chris.Larson@xxxxxx)
Date: Thu Apr 11 2002 - 14:54:44 GMT-3
oh boy. Not again.
-----Original Message-----
From: Jaspreet Bhatia [mailto:jasbhati@cisco.com]
Sent: Thursday, April 11, 2002 12:23 PM
To: Timothy Ouellette
Cc: cisco@groupstudy.com; ccielab@groupstudy.com
Subject: Re: Change the Bridge ID on a cat5k
Timothy ,
If the goal is just to change the Bridge ID ,then
just change the Priority . I don't know any way to change the MAC address
of the switch . Now, if teh ultimate goal is to stop the switch from
becoming the root of the Spanning Tree . Then you can use the STP Root
Gaurd Enhncement feature .
Check this out
http://www.cisco.com/warp/public/473/74.html
Thanks and hope this helps
Jaspreet
At 02:30 AM 4/11/2002 -0400, Timothy Ouellette wrote:
>Scouring cisco for an answer that someone mentioned.
>
>I'm trying to change the Bridge-ID (BID) for a particular vlan on a
>cat5k. I know it's possible if I just change the priorty for that
>particular vlan. Is it possible to change the mac address on a vlan so
>that the BID will change without change the prioty. Here's the question
>that was posed "how does one change the bridge ID for VLAN 200 on a
>Catalyst 5000 (os is 5.5(10)b"
>
>Can anyone help?
>
>Tim
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:58:05 GMT-3