From: miken (miken@xxxxxxxxx)
Date: Thu Apr 11 2002 - 01:04:43 GMT-3
You can also telnet into tty lines instead of vty by:
telnet 192.168.0.1 2005 (ethernet address for term server and tty for async
cable 5)
Mikes2511 line 5
R5>
This goes right to the tty line which is shown here by a telnet session to
same address as above using port 23 to the term server itself:
Mikes2511 line 18
User Access Verification
Username: xxx
Password:
Mikes2511#sh line
Tty Typ Tx/Rx A Modem Roty AccO AccI Uses Noise Overruns
Int
0 CTY - - - - - 0 0
0 -
1 TTY 9600/9600 - - - - - 91 992
0 -
2 TTY 9600/9600 - - - - - 80 796
0 -
3 TTY 9600/9600 - - - - - 91 1016
0 -
4 TTY 9600/9600 - - - - - 91 2801
0 -
* 5 TTY 9600/9600 - - - - - 85 22426
0 -
6 TTY 9600/9600 - - - - - 73 913
0 -
7 TTY 9600/9600 - - - - - 86 372
0 -
8 TTY 9600/9600 - - - - - 8 415
0 -
9 TTY 9600/9600 - - - - - 10 813
0 -
10 TTY 9600/9600 - - - - - 9 180
0 -
11 TTY 9600/9600 - - - - - 5 32
0 -
12 TTY 9600/9600 - - - - - 8 144
0 -
13 TTY 9600/9600 - - - - - 10 0
0 -
14 TTY 9600/9600 - - - - - 9 27
0 -
15 TTY 9600/9600 - - - - - 31 16277
0 -
16 TTY 9600/9600 - - - - - 2 5
0 -
17 AUX 9600/9600 - - - - - 0 0
0 -
* 18 VTY - - - - - 62 0
0 -
19 VTY - - - - - 14 0
0 -
20 VTY - - - - - 6 0
0 -
21 VTY - - - - - 6 0
0 -
22 VTY - - - - - 0 0
0 -
Line 18 is my regular telnet session(port 23) into the term server to give
you the show line. As you can see, this is just another way to accomplish
the same task. I am running c2500-i-l.121-7. Here is the rest of the
pertinent config:
service linenumber (kinda cool, shows what line you are on when you first
connect)
line 1 16
no exec
exec-timeout 0 0
transport input all
HTH,
Mike Nygard
----- Original Message -----
From: "Jaspreet Bhatia" <jasbhati@cisco.com>
To: "MADMAN" <dave@interprise.com>
Cc: "Jim Newton" <jnewton@internetnoc.com>; "Bob Sinclair" <bsin@erols.com>;
"Tu Nguyen" <tunguyen@juniper.net>; <ccielab@groupstudy.com>
Sent: Wednesday, April 10, 2002 8:42 PM
Subject: Re: Increase Telnet Connection On Cisco TermServ
> Hello ,
> this is the limit of vty lines in the 12.2(1) code
that
> I am running
>
>
>
> IOS (tm) 3600 Software (C3620-A3JK8S-M), Version 12.2(1)
>
> R4(config)#line vty 0 ?
> <1-935> Last Line number
> <cr>
>
> R4(config)#line vty 0 935
>
> 935 lines !!!!! This is mind boggling !! .
>
>
> I hope this helps
>
> Jaspreet
>
>
>
>
> At 09:14 PM 4/10/2002 -0500, MADMAN wrote:
> > If I remember correctly you needed protocol translation capable IOS
which
> >includes enterprise in order to create vty's past 0-4.
> >
> > Dave
> >
> >Jim Newton wrote:
> >
> > > I think you need either enterprise or access server ios on it to do
this
> > > though. I tried it before and thought that this was what I found.
> > >
> > > If anyone knows different, let me know.
> > >
> > > -----Original Message-----
> > > From: nobody@groupstudy.com [mailto:nobody@groupstudy.com]On Behalf Of
Bob
> > > Sinclair
> > > Sent: Wednesday, April 10, 2002 7:02 PM
> > > To: Tu Nguyen
> > > Cc: ccielab@groupstudy.com
> > > Subject: Re: Increase Telnet Connection On Cisco TermServ
> > >
> > > I believe that if you enter:
> > >
> > > (config)# line vty 0 10
> > >
> > > it will create lines 5,6,7,8,9,10.
> > >
> > > Not sure what the limit is.
> > >
> > > ----- Original Message -----
> > > From: "Tu Nguyen" <tunguyen@juniper.net>
> > > To: <ccielab@groupstudy.com>
> > > Sent: Wednesday, April 10, 2002 7:03 PM
> > > Subject: Increase Telnet Connection On Cisco TermServ
> > >
> > > > Hi All,
> > > >
> > > > Does anyone know how I can increase more than 4 telnet connections
on
> > > > the Cisco 2511 Term Server? It's only allowed 4, but would like to
go
> > > > beyond the limitation.
> > > >
> > > > Thanks,
> > > >
> > > > Tu
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:58:04 GMT-3