From: Dennis Laganiere (dennisl@xxxxxxxxxxxxxxxxxxx)
Date: Mon Apr 08 2002 - 15:13:34 GMT-3
I used a Netgear home router. It's configuration is default out of the box,
except that I changed the admin password and created a rule to have incoming
telnet sessions redirected to the internal address of my terminal server.
The Netgear interface is pretty straight forward, and the router is less
then $200 (it might even be less then $100 by now)... You don't need a
crossover cable because your going to the Ethernet port on the terminal
server.
I hope that helps...
--- Dennis
-----Original Message-----
From: Wright, Jeremy [mailto:JA_WRIGHT@admworld.com]
Sent: Monday, April 08, 2002 10:55 AM
To: 'ccielab@groupstudy.com'
Subject:
i think this thread has been mentioned before but i cant find it in the
archives. does any one have a config for having a cable modem and the isp
gives you 1 ip. i want to attach it to my terminal server and connect to my
pod from work through telnet. im assuming i would need a cross over cable?
************************
Jeremy Wright
Network Analyst
Archer Daniels Midland
ja_wright@admworld.com
(217)451-4063
************************
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:57:59 GMT-3