From: Narvaez, Pablo (Pablo.Narvaez@xxxxxxxxxxxxx)
Date: Mon Apr 08 2002 - 13:07:33 GMT-3
what command you you issue in order to stop periodoc SAPs updates on a LAN inte
rface provided that you're using RIP? ...
hockito
-----Original Message-----
From: Logan, Harold [mailto:loganh@mcc.cc.fl.us]
Sent: Lunes, 08 de Abril de 2002 09:19 a.m.
To: Giveortake@aol.com; ccielab@groupstudy.com
Subject: RE: IPX point-to-multipoint IPEXPERT lab19
The most important thing to do is disable split horizon in eigrp on R2 with no
ipx split-horizon eigrp [AS#] on the subinterface. In similar scenarios I've ha
d to use the frame-relay map ipx commands on all 3 routers. If you don't use th
e map commands, R5 and R6 will be able to talk to R2 via inverse arp, but they
won't be able to talk to each other.
hth,
Hal
-----Original Message-----
From: Giveortake@aol.com [mailto:Giveortake@aol.com]
Sent: Sun 4/7/2002 11:22 PM
To: ccielab@groupstudy.com
Cc:
Subject: IPX point-to-multipoint IPEXPERT lab19
Simple IPX stuff for most of you.. I have IPX RIP disabled on all rout
ers.
IPX EIGRP enabled on all routers advertising all networks.
R2 has S0.254 point-to-multipoint connecting to R5 and R6. Via frame r
elay
cloud.
R2
/ \
R5 R6
R5 & R6 are not using subinterfaces. Do I have to use the frame-rela
y map
IPX command on all the routers in order for them to form IPX EIGRP nei
ghbor
relationships?
My IPexpert lab 19 says that I don't based upon the sample configs. Ho
wever
I can not make the IPX EIGRP relationships form without putting in the
Frame-relay map IPX statements.....
Thanks,
David
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:57:59 GMT-3