From: Ahmed Mamoor Amimi (mamoor@xxxxxxxx)
Date: Sun Apr 07 2002 - 02:04:41 GMT-3
Also check out :
For Sap :
http://www.cisco.com/warp/public/698/acl200.html
For MAC :
http://www.cisco.com/warp/public/697/dlswfilter.shtml#macfilter
-Mamoor
----- Original Message -----
From: Narvaez, Pablo <Pablo.Narvaez@getronics.com>
To: Chua, Parry <Parry.Chua@compaq.com>; Larry Whitfill <whitfill@cox.net>;
<ccielab@groupstudy.com>
Sent: Monday, April 08, 2002 8:35 AM
Subject: RE: SAP ACLs
> Just wondering about this acl, shouldn't it be like:
>
> +- access-list 201 permit 0x0404 0x1010
> +- access-list 202 permit 0x0808 0x1010 ? I tested with that wildcars as
with IP ACLs and it worked indicated "0" = exact match required ...
>
> Am I right? just wondering ..
>
> -hockito-
>
>
>
> -----Original Message-----
> From: Chua, Parry [mailto:Parry.Chua@compaq.com]
> Sent: Domingo, 07 de Abril de 2002 10:15 p.m.
> To: Larry Whitfill; ccielab@groupstudy.com
> Subject: RE: SAP ACLs
>
>
> For testing, i would suggest you to do the following.
>
> - Create three access-list
> +- access-list 201 permit 0x0404 0x0101
> +- access-list 202 permit 0x0808 0x0101
> +- access-list 203 permit 0x0000 0x0d0d
>
> Create 3 SNA session using lasp 4, 8, C.
>
> Test with each access-list and see the result. access-list 201 should
allow ony lsap 4, 202 should allow lsap 8 and 203 should allow all three
lsap.
>
> Parry Chua
>
> -----Original Message-----
> From: Larry Whitfill [mailto:whitfill@cox.net]
> Sent: Monday, April 08, 2002 10:42 AM
> To: ccielab@groupstudy.com
> Subject: SAP ACLs
>
>
> http://www.cisco.com/warp/public/698/acl200.html#caseD
>
> Friends,
>
> This may be old news but I found this after investigating a discrepancy in
> the Practical Studies book. I'm particularly interested in the advised
> method of filtering SNA:
>
> "access-list 201 deny 0x0000 0x0d0d"
>
> The site admits that not all SNA SAPS will be filtered by this, but is it
> safe to assume that this is good enough for testing purposes?
>
> Larry
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:57:59 GMT-3