From: MADMAN (dave@xxxxxxxxxxxxxx)
Date: Sat Apr 06 2002 - 23:50:22 GMT-3
Yes I have done this and it works. I'm at home and I don't have a copy
of the configs here but basically you set up the hub router ISDN interface
as a multipoint, give the interface an ip address with a /29 mask and point
one map at site one and the other at site two. Sned me an email and I will
send you the example Monday.
Dave
Richard Furda wrote:
> Hello,
>
> Has anyone successfully used 1 BRI line with 2 routers?
> More preciselly, calling one router (on 1 B channel) from other
> router (on the second B channel)? I've been assiged 3 phone numbers
> for this line. Almost identical output (healthy call setup) from
> 'debug isdn q931' is shown on both routers when one of the 3 numbers is
> called. I haven't got deep into the ISDN dialer configs yet, just
> wondering before i start. I believe 'isdn answer1 <num>' is the answer
> to my question?
>
> Thanks,
> Rich
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:57:58 GMT-3