From: Jet Cheung (ccie7559@xxxxxxx)
Date: Sat Apr 06 2002 - 23:53:19 GMT-3
Sir,
Thank you for recieve.
But the scenior can't permit you use the same AS # between Igrp and Eigr
p. This is too difficult. Do you any command use to define the OSPF on this rou
ter as a transit protocol. If you find out You can solve this problem.
----- Original Message -----
From: "Yusuf" <yusuff@cisco.com>
To: "'Jet Cheung'" <ccie7559@163.com>; <ccielab@groupstudy.com>
Sent: Sunday, April 07, 2002 9:35 AM
Subject: RE: OSPF IGRP EIGRP redistribute
> 3-way redistribution does not work, i.e OSPF (or any protocol) cannot be
> used as a transit protocol. You have to redistribute EIGRP into IGRP (if
> they are different AS #s) else they would anyway, as EIGRP/IGRP (same AS)
> redistributes automatically.
>
> HTH
> R/Yusuf
>
> -----Original Message-----
> From: nobody@groupstudy.com [mailto:nobody@groupstudy.com]On Behalf Of
> Jet Cheung
> Sent: Sunday, 7 April 2002 4:48 AM
> To: ccielab@groupstudy.com
> Subject: OSPF IGRP EIGRP redistribute
>
>
> Hi,every body.
> I have a router running three routing protocol. OSPF IGRP and EIGRP. My
> redis direction is EIGRP--to--OSPF--to--IGRP. Why my another router connect
> to IGRP can't learn the EIGRP's Route. Please help me. I want to find out a
> method without chang my redis direction. Note: Have no redis between IGRP
> and EIGRP.
> Charls
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:57:58 GMT-3