From: Nicolai Gersbo Solling (nicolai@xxxxxxxxx)
Date: Wed Apr 03 2002 - 11:14:57 GMT-3
Hi there...
I have a bit of problems verifying PPP Callback...
What I have is the following
R1----ISDN----R2
R1 requests callback, R2 accepts
When I do a ping from R1 to R2(Which triggers the DDR) the ping goes through
fine, and I see the Virtual bundle1 comming up twice, but when I do show
ISdn active I get the following output on R1...
ISDN-1#sh isdn active
----------------------------------------------------------------------------
----
ISDN ACTIVE CALLS
----------------------------------------------------------------------------
----
Call Calling Called Remote Seconds Seconds Seconds Charges
Type Number Number Name Used Left Idle
Units/Currency
----------------------------------------------------------------------------
----
Out 384020 ISDN-2 13 - - 0
----------------------------------------------------------------------------
----
When I do this show ISDN active should it not read call-type "in" instead of
out?
I have attached the configs here:
R1
ISDN-1#sh run
Building configuration...
Current configuration : 1340 bytes
!
version 12.1
service timestamps debug uptime
service timestamps log uptime
no service password-encryption
service udp-small-servers
service tcp-small-servers
!
hostname ISDN-1
!
no logging buffered
!
username ISDN-2 password 0 nicolai
username ISDN-1 password 0 nicolai
!
!
!
!
ip subnet-zero
no ip domain-lookup
!
isdn switch-type basic-net3
!
!
!
interface Loopback0
ip address 192.168.1.1 255.255.255.0
!
interface Loopback1
ip address 1.1.1.1 255.255.255.0
!
interface Ethernet0
ip address 192.168.2.1 255.255.255.0
keepalive 1
shutdown
!
interface BRI0
ip address 192.168.3.1 255.255.255.0
encapsulation ppp
ip ospf demand-circuit
dialer idle-timeout 30
dialer map ip 192.168.3.2 broadcast 384020
dialer-group 1
isdn switch-type basic-net3
ppp callback request
ppp authentication chap
ppp chap hostname ISDN-1
ppp chap password 7 14191B0803082B22
ppp multilink
!
router ospf 1
log-adjacency-changes
network 192.168.1.1 0.0.0.0 area 0
network 192.168.2.1 0.0.0.0 area 0
network 192.168.3.1 0.0.0.0 area 0
!
no ip classless
no ip http server
!
logging trap critical
access-list 1 permit any
dialer-list 1 protocol ip permit
!
line con 0
exec-timeout 0 0
line vty 0 4
login
!
end
R2:
ISDN-2#sh run
Building configuration...
Current configuration : 1118 bytes
!
version 12.1
service timestamps debug uptime
service timestamps log uptime
no service password-encryption
!
hostname ISDN-2
!
!
username ISDN1 password 0 nicolai
username ISDN-1 password 0 nicolai
username ISDN-10 password 0 nicolai
username all
!
!
!
!
ip subnet-zero
no ip domain-lookup
!
isdn switch-type basic-net3
!
!
!
interface Loopback0
ip address 192.168.4.2 255.255.255.0
ip ospf network point-to-point
!
interface Ethernet0
ip address 192.168.2.2 255.255.255.0
keepalive 1
!
interface BRI0
ip address 192.168.3.2 255.255.255.0
encapsulation ppp
ip ospf demand-circuit
dialer callback-secure
dialer idle-timeout 30
dialer map ip 192.168.3.1 class CALLBACK broadcast 384010
dialer-group 1
isdn switch-type basic-net3
ppp callback accept
ppp authentication chap callin
ppp multilink
!
router ospf 1
log-adjacency-changes
network 192.168.2.2 0.0.0.0 area 0
network 192.168.3.2 0.0.0.0 area 0
network 192.168.4.2 0.0.0.0 area 0
!
no ip classless
no ip http server
!
!
map-class dialer CALLBACK
dialer callback-server
dialer-list 1 protocol ip permit
!
line con 0
line vty 0 4
login
!
end
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:57:52 GMT-3