From: Brian F (e280l132@xxxxxxxxxxx)
Date: Tue Apr 02 2002 - 18:39:19 GMT-3
Thanks for the quick response. I didn't realize it wasn't supported on the
1600..
-Brian
>From: "Craig King" <cking007@hotmail.com>
>Reply-To: "Craig King" <cking007@hotmail.com>
>To: e280l132@hotmail.com, ccielab@groupstudy.com
>Subject: Re: ISIS on a 1600 series
>Date: Tue, 02 Apr 2002 15:26:44 -0600
>
>ISIS is not supported on the 1600 or 1700's. The 2500 is the lowest model
>that will support ISIS.
>
>Use the Cisco Feature Navigator to determine what platform/release is
>required for a specific feature. It is located at (TAC login req'd):
>
>http://www.cisco.com/cgi-bin/Support/FeatureNav/FN.pl
>
>
>>From: "Brian F" <e280l132@hotmail.com>
>>Reply-To: "Brian F" <e280l132@hotmail.com>
>>To: ccielab@groupstudy.com
>>Subject: ISIS on a 1600 series
>>Date: Tue, 02 Apr 2002 15:30:04 -0500
>>
>>I am having trouble running ISIS on a 1601 router. Has anyone been able to
>>get it to work?? do I have a bad version of IOS. I downloaded the latest
>>version (from the 12.1 series) 12.1.14. Still no luck. When I am at the
>>following prompt. This is what I get
>>
>>router(config)#router isis
>>router)config)#
>>
>>it never goes into the configuration mode for isis. On my 2500 series I
>>have
>>no problem. Can the 1600 even support ISIS?
>>
>>thanks for any help
>>
>>-Brian
>>
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:57:52 GMT-3