From: Narvaez, Pablo (Pablo.Narvaez@xxxxxxxxxxxxx)
Date: Tue Apr 02 2002 - 13:07:17 GMT-3
Hey guys, I have one question about CQ .... I do understand how to calculate th
e byte-count and how to assign these values to queues .... The point is, let sa
id I have a FR multipoint sub-if and I'm required to prioritize dlsw and assign
certain byte-count according the frame-size. How should I apply the queue-list
to the interface? .... should I configure it as custom-list under the physical
interface or as FRTS using a map-class? ... Would it be possible to apply the
custom-list under the physical interface and have the same result as with FRTS?
...
cheers,
-hockito-
-----Original Message-----
From: Ahmed Mamoor Amimi [mailto:mamoor@ieee.org]
Sent: Lunes, 01 de Abril de 2002 01:23 p.m.
To: Kurt Claes; ccielab@groupstudy.com
Subject: Re: prioritization DLSw
u have to open ports on dlsw to get the priority it need at dlsw.
that is 1981,1982 and 1983 and 2065 befault open
Then do priority on these port by using extented access-list
-Mamoor
----- Original Message -----
From: Kurt Claes <Kurt.Claes@inseurop.com>
To: <ccielab@groupstudy.com>
Sent: Monday, April 01, 2002 7:49 PM
Subject: prioritization DLSw
> Hi group,
>
> I've been playing around with different queuing strategies, and I have the
> following question :
>
> If they ask you to prioritize DLSw traffic (and DLSw is using TCP encap.),
> what would you say in your list ?
>
> e.g. priority list 1 protocol dlsw high,
>
> or
>
> priority list 1 protocol ip high tcp 2065 ??
>
> thx in advance,
>
> Kurt
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:57:51 GMT-3