From: Ahmed Mamoor Amimi (mamoor@xxxxxxxx)
Date: Mon Apr 01 2002 - 16:24:04 GMT-3
"frame-relay traffice shaping" will take care of that.
And if u dont disable adapive explicidly then the IOS will do that for u.
-Mamoor
----- Original Message -----
From: Williams, Glenn <WILLIAMSG@PANASONIC.COM>
To: 'Ahmed Mamoor Amimi' <mamoor@ieee.org>; Muhamamd Durrani
<dan_schaw@yahoo.com>; mascot net <mascotnet@yahoo.com>;
<ccielab@groupstudy.com>
Sent: Monday, April 01, 2002 8:02 PM
Subject: RE: FRTS
> if you disable adaptive shaping becn, then how will you react to
congestion
> if you have min cir set. Seems to me that you would usually want it on.
Is
> this not correct?
> GW
>
> -----Original Message-----
> From: Ahmed Mamoor Amimi [mailto:mamoor@ieee.org]
> Sent: Sunday, March 31, 2002 4:47 PM
> To: Muhamamd Durrani; mascot net; ccielab@groupstudy.com
> Subject: Re: FRTS
>
>
> As my per understanding... adaptive shaping uses the automatic shaping ,
> working with the BECN.
> and FRTS use the manual that we have to set the cir and other stuff
manually
> to control all the fields.
>
> if we just enable adaptive shaping then when there is congestion and BECN
> comes the traffic will be cut to
> 1/8 times of the total bandwidth of the interface on whcih it is
configured.
>
> So when doing FRTS u should disable adapive shape so it dont come it
between
> this shapping.
>
>
> Please correct me if my understanding is wrong.
>
> -Mamoor
>
>
> ----- Original Message -----
> From: Muhamamd Durrani <dan_schaw@yahoo.com>
> To: mascot net <mascotnet@yahoo.com>; <ccielab@groupstudy.com>
> Sent: Monday, April 01, 2002 3:21 AM
> Subject: Re: FRTS
>
>
> > Enabling FRTS on an interface enables both traffic
> > shaping and per-VC queueing on all the PVCs and SVCs
> > on the interface. Traffic shaping enables the router
> > to control the output rate of the circuit and "react
> > to congestion notification information if also
> > configured."
> >
> > SO your Answer is " YES" we can disable Adaptive
> > Shaping while Traffic Shaping is ON .......
> >
> > PS: see the quoted line ......
> >
> > Regards,
> > Muhammad
> >
> >
> > --- mascot net <mascotnet@yahoo.com> wrote:
> > > Could anyone clarify if I should use the command "no
> > > frame-relay adaptive-shaping" when I configure FRTS.
> > >
> > > -Mascot
> > >
> > >
> > >
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:57:51 GMT-3