From: MOLINA, MARTIN J *Internet* (PBI) (mm1343@xxxxxxx)
Date: Mon Apr 01 2002 - 15:44:02 GMT-3
Group,
I understand this has been hit hard lately but I am still not getting it to
work:
My topology is simple:
R1-------------R2-----------------R3
I am using one AS and I am using R2 as a RR. My IGP is OSPF. R1 and R3 have
loopback IP's that have been installed in BGP via the network command. I am
redistributing BGP into OSPF on R1 and R3 so OSPF is aware of the loopback
IP's. The key is I am trying to do this without using the "no sync" command.
I can't get R3's BGP table to sync on R1's loopback network and I can't get
R1's BGP table to sync on R3's loopback network. I have made sure that the
BGP and OSPF RID's are the same on all three routers. The IGP table is aware
of all routes with the proper masks. I changed my IGP to Eigrp and it worked
like a champ so I know it is an OSPF related issue. Does anyone know what I
might be doing wrong? Any help would be appreciated.
Martin Molina
Senior Network Engineer
Pacific Bell Internet Services
CCNP CCDP
desk: 925 973-7774
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:57:51 GMT-3