From: Lionel Florit (lflorit@xxxxxxxxx)
Date: Mon Apr 01 2002 - 00:44:38 GMT-3
Crystal,
FYI, DLSw rides on 2065 unless you configure the priority keyword in the
remote-peer.
Lionel
At 06:21 AM 3/31/2002 -0800, Crystal Lee wrote:
>Hi Group
>
>
>As per this url under Custome Queuing section
>
>http://www.cisco.com/warp/public/cc/pd/ibsw/ibdlsw/prodlit/dlsw5_rg.htm
>
>Custom queuing reserves a portion of the bandwidth of
>a link for each selected traffic type
>
>could someone please tell me if both configs below
>would reserve 50% of bandwidth for dlsw .
>
>
>queue-list 1 protocol ip 1 tcp 2065
>queue-list 1 default 2
>
>
>OR
>
>queue-list 1 protocol ip 1 list 101
>queue-list 1 default 2
>
>Access-list 101 permit tcp any eq 2062 any
>Access-list 101 permit tcp any any eq 1981
>Access-list 101 permit tcp any any eq 1982
>Access-list 101 permit tcp any any eq 1983
>
>Apart from using CQ, is there any other way to reserve
>bandwidth for dlsw ?
>
>
>Any feedback is greatly appreciated
>
>CL
>
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:57:27 GMT-3