From: steven.j.nelson@xxxxxx
Date: Sun Mar 31 2002 - 05:13:25 GMT-3
Parry
Isn't that what this is ?
source-bridge transparent 500 100 1 5
Thanks
Steve
-----Original Message-----
From: Chua, Parry [mailto:Parry.Chua@compaq.com]
Sent: 31 March 2002 06:49
To: Landon Fitts; ccielab
Subject: RE: DLSw+ Translation between Eth and TR
No, Router A only has ethernet and serial interface, I presume you know that
dlsw bridge-group is reuire in router A and B, since Router B has tpken ring
and ethernet, you also
requre source-bridge transparant sb_vr Tb_Vr sb_br# tn_br#
Regards
Parry
-----Original Message-----
From: Landon Fitts [mailto:l.fitts@mindspring.com]
Sent: Sunday, March 31, 2002 12:40 PM
To: ccielab@groupstudy.com
Subject: DLSw+ Translation between Eth and TR
DLSw gurus, I have a question for you.
Is the "source-bridge ring-group" command required on routerA in this
example or is the "dlsw bridge-group" all that is required?
e0---rtrA---s0---rtrB---e0
|
t0
On routerB I know that these commands are required:
source-bridge ring-group 500
source-bridge transparent 500 100 1 5
dlsw bridge-group 5
Regards,
Landon Fitts
CCNP, CCDP, NNCSE, NNCDE
l.fitts@mindspring.com
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:57:27 GMT-3