From: Manny Gonzalez (manny@xxxxxxx)
Date: Sat Mar 30 2002 - 20:44:03 GMT-3
Yes you may... The right code/hardware will allow you to do it. Although
I think it HAS to be dot1q and not isl... just fyi.
fwells11 wrote:
>
> I seem to recall someone in the archives being able to do dot1q trunking
> over a 10mb interface...
>
> ----- Original Message -----
> From: "Khan Munib" <Munib.Khan@services.fujitsu.com>
> To: "'kym blair'" <kymblair@hotmail.com>; <franjime@cisco.com>;
> <ccielab@groupstudy.com>; <Sixfooter777@btopenworld.com>;
> <Jeffbk@austin.rr.com>
> Sent: Friday, March 29, 2002 1:32 PM
> Subject: RE: trunking on 2600
>
> > Many thanx to all that replied. I actually have a 2610 with a F/Ethernet
> > module 1FE-TX. I also only have 32/8 mem and flash. managed to find
> > c2600-js-mz.120-3.T3.bin which goes on and gives me the dot1q
> encapsulation.
> > However it`s not ideal as many other features are not there, eg. manually
> > setting the router ID under ospf etc. But at least my router on a stick
> > works. Thanx again for your input.
> >
> > -----Original Message-----
> > From: kym blair [mailto:kymblair@hotmail.com]
> > Sent: 29 March 2002 21:19
> > To: franjime@cisco.com; Munib.Khan@services.fujitsu.com;
> > ccielab@groupstudy.com
> > Subject: RE: trunking on 2600
> >
> >
> > My 2620 with c2600-js-mz.122-1.bin (12.2(1) Enterprise Plus) has the
> > encapsulation methods you are looking for:
> >
> > R2(config)#int fast 0/0.30
> > R2(config-subif)#encap ?
> > dot1Q IEEE 802.1Q Virtual LAN
> > isl Inter Switch Link - Virtual LAN encapsulation
> > sde IEEE 802.10 Virtual LAN - Secure Data Exchange
> > tr-isl Token Ring Inter Switch Link - Virtual LAN encapsulation
> >
> > R2#sh version
> > Cisco Internetwork Operating System Software
> > IOS (tm) C2600 Software (C2600-JS-M), Version 12.2(1), RELEASE SOFTWARE
> > (fc2)
> > <snip>
> > System image file is "flash:c2600-js-mz.122-1.bin"
> >
> > HTH, Kym
> >
> >
> >
> >
> >
> > >From: "Frank Jimenez" <franjime@cisco.com>
> > >Reply-To: "Frank Jimenez" <franjime@cisco.com>
> > >To: "'Khan Munib'" <Munib.Khan@services.fujitsu.com>,
> > ><ccielab@groupstudy.com>
> > >Subject: RE: trunking on 2600
> > >Date: Fri, 29 Mar 2002 12:37:52 -0600
> > >
> > >Found it.
> > >
> > >http://www.cisco.com/univercd/cc/td/doc/product/software/ios122/122relnt
> > >/xprn122t/122tnewf.htm
> > >
> > >"802.1Q encapsulation is supported on the built-in ethernet ports of the
> > >Cisco 2610, 2611, and 2612 in Cisco IOS Release 12.2(2)T and later
> > >releases. The NM-1E, NM-4E, NM-1E2W, NM-1E1R2W, and NM-2E2W do not
> > >support 802.1Q in Cisco 2600 or 3600 series routers."
> > >
> > >Frank Jimenez, CCIE #5738
> > >franjime@cisco.com
> > >
> > >
> > >-----Original Message-----
> > >From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
> > >Khan Munib
> > >Sent: Friday, March 29, 2002 10:53 AM
> > >To: 'ccielab@groupstudy.com'
> > >Subject: trunking on 2600
> > >
> > >
> > >Can anyone tell me what the software version I need on my 2600 to allow
> > >me to do dot1q trunking. Currently running c2600-js-mz.120-21a.bin
> > >which only gives me the option of using ISL, SDE or TRISL. My router
> > >has 32/8 mem and flash....many thanx in advance........
> > >
> > >This e-mail is only for the use of its intended recipient. Its contents
> > >are confidential and may be privileged. ICL does not guarantee that
> > >this e-mail has not been intercepted and amended or that it is
> > >virus-free.
> > >
> > >Munib Ali Khan
> > >Network Services
> > >
> > >Please note that from 2nd April 2002, ICL will operate as Fujitsu
> > >Services under the Fujitsu brand name. Therefore my contact details
> > >will change. My new e-mail address will change to
> > >Munib.Khan@services.fujitsu.com from 2nd April.
> > >
> > >ICL, Cavendish Road, Stevenage Herts. SG1 2DY
> > >Tel: +44 (0) 870 234 8171 or 7301 5515
> > >Mobile : +44 (0) 7867 823 214
> > >Fax: +44 (0) 870 234 9199 or 7301 2000
> > >E-mail: munib.khan@icl.com
> > >Web: www.icl.com
> > >
> > >International Computers Limited, Registered in England no 96056,
> > >Registered Office 26, Finsbury Square, London, EC2A 1SL
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:57:26 GMT-3