From: MOLINA, MARTIN J *Internet* (PBI) (mm1343@xxxxxxx)
Date: Sat Mar 30 2002 - 02:31:11 GMT-3
Check out the archives my friend. I believe you have to do 3 things:
1. Do not specify an IP address in your local peer statements on either side
2. Frame map dlsw (which you already have done)
3. And I believe you have to use physical interfaces as opposed to
sub-interfaces
Good luck!
-----Original Message-----
From: yakout esmat [mailto:yesmat@iprimus.com.au]
Sent: Friday, March 29, 2002 8:58 PM
To: Groupstudy
Subject: DLSW Direct encap
Hi all,
I am having a problem getting my direct encapsulation peers connected.
r5 is hub r6,r3&r1 are spokes: (encap frame relay)
Following is my configs:
r5#
!
dlsw local-peer peer-id 200.200.100.1
dlsw remote-peer 0 frame-relay interface Serial0.1 405 pass-thru
dlsw remote-peer 0 frame-relay interface Serial0.1 403 pass-thru
dlsw remote-peer 0 frame-relay interface Serial0.2 402 pass-thru
!
!
interface Serial0
no ip address
encapsulation frame-relay
no fair-queue
frame-relay traffic-shaping
!
interface Serial0.1 multipoint
description link to r3&r1
ip address 155.10.100.5 255.255.255.240
ip ospf authentication message-digest
ip ospf message-digest-key 1 md5 cisco
ip ospf dead-interval 40
ip ospf priority 200
frame-relay class cisco
frame-relay map dlsw 403
frame-relay map dlsw 405
frame-relay map ip 155.10.100.1 403 broadcast
frame-relay map ip 155.10.100.3 405 broadcast
!
interface Serial0.2 point-to-point
description link to r6
ip address 155.10.200.5 255.255.255.0
ip ospf message-digest-key 1 md5 cisco
frame-relay interface-dlci 402
!
r1&r3&r6#
dlsw local-peer peer-id 155.10.1.1
dlsw remote-peer 0 frame-relay interface Serial0 304 pass-thru
!
interface Serial0
ip address 155.10.100.1 255.255.255.240
encapsulation frame-relay
ip ospf authentication message-digest
ip ospf message-digest-key 1 md5 cisco
ip ospf dead-interval 40
ip ospf priority 0
frame-relay map dlsw 304
frame-relay map ip 155.10.100.3 304 broadcast
frame-relay map ip 155.10.100.5 304 broadcast
no frame-relay inverse-arp
frame-relay lmi-type cisco
!
When I use direct encap no connection gets formed, but when I use DLSW Lite
(llc2) it works fine. Am I missing some thing?
Thanks
ya
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:57:26 GMT-3