From: BEDA jain (bedup@xxxxxxxxxxx)
Date: Fri Mar 29 2002 - 15:41:05 GMT-3
r1-------110------------r2----220------------r3-------400
router r1 and r2 running ipx rip and r2 and r3 running nlsp. router r3
has loopback int .
i put a staitic route in r1 .
ipx sap 7 print 400.0001.0001.0001 451 2
i can see all the route in r1 ,r2 and r3 for ipx network.
i can see the server in r1, but i did not see any sap server in router r2
and r3.
do i need to do some thing else to pass static sap to router r2 and r3 ?
i can ping to network 400, but node i put for static route is not known
to r1.
Thanks,
Beda
BEDA PRAKASH JAIN Apartment address 1116 woodway bluff circle cary,nc
27513 9196789188 res 9193922891 work 9195220242 cell >From:
steven.j.nelson@bt.com >Reply-To: steven.j.nelson@bt.com >To:
ccielab@groupstudy.com >Subject: Route Reflector and Peer Group >Date:
Fri, 29 Mar 2002 17:50:43 -0000 > >All, > >I have the following >
>R1(AS254)-------R10(AS1)-------R3(AS1)--Frame_Cloud--R6(AS1)--R7(AS1) >
>Basically R1 is ebgp to r10, then ibgp to r3, R6 and R7 are reflector
>clients of r3 in peer group "peers", next hop self is set for the peer
group >at R3 (As is remote AS, RR Client etc etc) > >The problem is that
the next hop isn't being changed at R3 for the peers in >the group even
though I have the commands :- > >neighbor peers peer-group >neighbor
peers remote-as 1 >neighbor peers route-reflector-client >neighbor peers
next-hop-self >neighbor peers update source loopback 0 >neighbor x.x.x.x
peer-group peers .... and so on for all routers in the peer >group > >All
IGP functionality is fine and loopbacks are being advertised to every
>router in the workgroup, so reachability isn't an issue. > >Any
thoughts. > >Thanks > >Steve > > >Steve Nelson >Customer Engineer >BT
Ignite- National Solutions >T: +44 (0)1422 338881 M: +44 (0)7811 944172
>e-mail: steven.j.nelson@bt.com >pp HW A170, PO Box 200(HOM-NZ), London,
N18 1ZF > > British Telecommunications plc > > Registered office: 81
Newgate Street London EC1A 7AJ > > Registered in England no. 1800000. > >
This electronic message contains information from British
>Telecommunications plc which may be privileged or confidential. The
>information is intended to be for the use of the individual(s) or entity
>named above. If you are not the intended recipient be aware that any
>disclosure, copying, distribution or use of the contents of this
information >is prohibited. If you have received this electronic message
in error, please >notify us by telephone or email (to the numbers or
address above) >immediately.
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:57:25 GMT-3