RE: Frame DLCI

From: steven.j.nelson@xxxxxx
Date: Fri Mar 29 2002 - 14:37:11 GMT-3

• Next message: Frank Kim: "Re: OT: Will a NM-1E2W work in a 2610/2611 router?"
• Previous message: Frank Kim: "OT: Will a NM-1E2W work in a 2610/2611 router?"
• Maybe in reply to: steven.j.nelson@xxxxxx: "Frame DLCI"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

   
and no arp frame so that you do not advertised to be learnt.

Ta

Steve

-----Original Message-----
From: Diment, Andrew [mailto:adiment@qwest.com]
Sent: 29 March 2002 17:02
To: Nelson,SJ,Steven,IVNH25 C; ccielab@groupstudy.com
Subject: RE: Frame DLCI

You're exactly correct. You will always see the pvc's and there is no way
to get around that. The only thing to do is a "no frame-relay inverse arp"
so a dynamic map will not be learned.

Andy

-----Original Message-----
From: steven.j.nelson@bt.com [mailto:steven.j.nelson@bt.com]
Sent: Friday, March 29, 2002 6:37 AM
To: ccielab@groupstudy.com
Subject: Frame DLCI

All

I see so many labs that ask you to use only specified DLCI when you have a
frame connection to say a fully meshed cloud.

This can be solved by disabling inverse arp and arp for frame, but do they
actually only want to see the pvc's to be used as well as the l2 to l3 map.

This is more difficult as the PVC's are advertised form the switch on LMI,
can this be controlled from the router, I would expect this can only be done
from the switch by removing the pvc ?

Any thoughts ?

Thanks

Steve

Steve Nelson
Customer Engineer
BT Ignite- National Solutions
T: +44 (0)1422 338881 M: +44 (0)7811 944172
e-mail: steven.j.nelson@bt.com
pp HW A170, PO Box 200(HOM-NZ), London, N18 1ZF
> British Telecommunications plc
> Registered office: 81 Newgate Street London EC1A 7AJ
> Registered in England no. 1800000.
> This electronic message contains information from British
Telecommunications plc which may be privileged or confidential. The
information is intended to be for the use of the individual(s) or entity
named above. If you are not the intended recipient be aware that any
disclosure, copying, distribution or use of the contents of this information
is prohibited. If you have received this electronic message in error, please
notify us by telephone or email (to the numbers or address above)
immediately.

• Next message: Frank Kim: "Re: OT: Will a NM-1E2W work in a 2610/2611 router?"
• Previous message: Frank Kim: "OT: Will a NM-1E2W work in a 2610/2611 router?"
• Maybe in reply to: steven.j.nelson@xxxxxx: "Frame DLCI"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:57:25 GMT-3