From: Tarek Sabry (tsabry@xxxxxxxxxxxxxxxxxxx)
Date: Wed Mar 27 2002 - 13:08:29 GMT-3
I have an idea that you may want to test. How about disabling the ethernet
port from the switch? Try this and let me know if it works.
Tarek
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com]On Behalf Of
Nicolai Gersbo Solling
Sent: Wednesday, March 27, 2002 8:47 AM
To: CCIE
Subject: ISDN Backupinterface - Luxury problem...
Hi there!
I have a setup with the following...
R1---ETH---R2
using ISDN as backup link...
Only problem is that I can only get the ISDN backup to kick in if i
physically disconnect the ethernet cable connecting R1 and R2...
A "shut" command is not enough...
Since my lab is in a remote area it really annoys me to run to and
fromeverytime I wan't to test something...
Any good ideas on how to configure the ethernet interface so that the ISDN
will kick in when I do a shut in one end!
I have tried messing around with keepalives etc., but it does not seem to
have any effect...
Nic
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:57:23 GMT-3