From: Dennis.D.Adekola@xxxxxxxxxxxxxxxxxx
Date: Tue Mar 26 2002 - 22:24:12 GMT-3
Paul,
Are you using a partially meshed frame-relay ?
Are you using priority statements undr the interfaces?
Are you using neighbour statements under the routing protocol
Further more, are your FR PVC's active.
Let's see ur config
Dennis
"Paul (SESAMe)" <paul@sesamedata.net>@groupstudy.com on 27/03/2002 01:02:33
Please respond to "Paul (SESAMe)" <paul@sesamedata.net>
Sent by: nobody@groupstudy.com
To: <ccielab
cc:
bcc:
Subject: OSPF Stuck in Ex-Start
Hi All,
Has anyone come across a problem with OSPF whereby the Neighbour adjacency
process
becomes stuck in the EX-Start state?
I am currently working on a lab that is working with OSPF and frame relay
and I am stuck with this problem. I have tried everything I can think of
but
it is all starting to look a little hazy now and config blindness is
beginning to set in!
I can post my configs if necessary but though I would see if anyone else
has come across this before? If you have I would love to know how you
resolved this.
I have had a looked on CCO (Bug finder also). There are references to a
stuck in Ex-start but it is mainly put down to miss matched MTU's which is
not a problem as all routers are set to the default of 1500. Sequence
numbers are also a possibility, but I haven't the faintest idea where to
start with these!
Thanks, Paul
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:57:23 GMT-3