From: Carlos A. Silva (carlos@xxxxxxxxxxx)
Date: Wed Mar 27 2002 - 11:01:29 GMT-3
actually, no...those lines are added auomatically with the well-known-vc's
command.
if ilmi and qsaal and ilmi are up and the configuration looks like mine,
then...there's just one other thing i HAD to do for this to work (twice , in
different occasions)...
reboot the ls1010!
:o)
> -----Original Message-----
> From: Ahmed Mamoor Amimi [mailto:mamoor@ieee.org]
> Sent: Tuesday, March 26, 2002 4:05 PM
> To: Carlos A. Silva; Rah Hussain; ccielab@groupstudy.com
> Subject: Re: SVC add-on module
>
>
> i have heard that ls1010 on default config will do the svc...
> u have added :
> atm pvc 0 5 rx-cttr 3 tx-cttr 3 interface ATM2/0/0 0 any-vci
> encap qsaal
> atm pvc 0 16 rx-cttr 3 tx-cttr 3 interface ATM2/0/0 0 any-vci
> encap ilmi
>
> and :
>
> atm route 47.0091.8100.0000.0030.800a.f301.4000.0c80.8000... ATM2/0/0
> internal
>
> dont this be done automatically.
>
> as when i do "show atm vc" i got ilmi and qsaal UP and normal.
> and the route is automatically added.
>
> let me know if i really have to add this... on the other hand i will try
> this also.
>
>
>
> -Mamoor
>
>
>
>
>
> ----- Original Message -----
> From: Carlos A. Silva <carlos@mnet.com.mx>
> To: Rah Hussain <Rah@network-sol.com>; <ccielab@groupstudy.com>
> Sent: Wednesday, March 27, 2002 6:40 PM
> Subject: RE: SVC add-on module
>
>
> > i don't think so.
> > you have to enable the well know vc's, though...here's some
> tesing that i
> > did a while ago. you might find it useful.
> >
> > it's a 7000 and a ls1010:
> >
> > hih.
> >
> > ls1010
> > =============
> >
> >
> > Switch#sh runn
> > Building configuration...
> >
> > Current configuration:
> > !
> > version 11.2
> > no service pad
> > !
> > hostname Switch
> > !
> > !
> > ip subnet-zero
> > !
> > atm service-category-limit cbr 64512
> > atm service-category-limit vbr-rt 64512
> > atm service-category-limit vbr-nrt 64512
> > atm service-category-limit abr-ubr 64512
> > atm address 47.0091.8100.0000.0030.800a.f301.0030.800a.f301.00
> > atm router pnni
> > node 1 level 56 lowest
> > redistribute atm-static
> > !
> > !
> > interface ATM1/0/0
> > no keepalive
> > atm manual-well-known-vc
> > atm pvc 0 5 rx-cttr 3 tx-cttr 3 interface ATM2/0/0 0 any-vci encap
> qsaal
> > atm pvc 0 16 rx-cttr 3 tx-cttr 3 interface ATM2/0/0 0 any-vci encap
> ilmi
> > !
> > interface ATM1/0/1
> > no keepalive
> > !
> > interface ATM1/0/2
> > no keepalive
> > !
> > interface ATM1/0/3
> > no keepalive
> > !
> > interface ATM1/1/0
> > no keepalive
> > !
> > interface ATM1/1/1
> > no keepalive
> > !
> > interface ATM1/1/2
> > no keepalive
> > !
> > interface ATM1/1/3
> > no keepalive
> > !
> > interface ATM2/0/0
> > ip address 10.1.1.1 255.255.255.0
> > no keepalive
> > atm nsap-address 47.0091810000000030800AF301.40000C808000.00
> > atm arp-server self
> > atm maxvp-number 0
> > atm pvc 0 any-vci encap aal5snap
> > atm pvc 0 any-vci encap aal5snap
> > atm pvc 0 any-vci encap aal5mux ip
> > !
> > interface Ethernet2/0/0
> > no ip address
> > !
> > no ip classless
> > atm route 47.0091.8100.0000.0030.800a.f301.4000.0c80.8000... ATM2/0/0
> > internal
> > !
> > line con 0
> > line aux 0
> > line vty 0 4
> > login
> > !
> > end
> >
> > Switch#
> > Switch#sh atm vc
> > Interface VPI VCI Type X-Interface X-VPI X-VCI Encap Status
> > ATM1/0/0 0 5 PVC ATM2/0/0 0 48 QSAAL UP
> > ATM1/0/0 0 16 PVC ATM2/0/0 0 49 ILMI UP
> > ATM1/0/0 0 33 SVC ATM2/0/0 0 56 SNAP UP
> > ATM1/0/1 0 5 PVC ATM2/0/0 0 41 QSAAL DOWN
> > ATM1/0/1 0 16 PVC ATM2/0/0 0 33 ILMI DOWN
> > ATM1/0/2 0 5 PVC ATM2/0/0 0 42 QSAAL DOWN
> > ATM1/0/2 0 16 PVC ATM2/0/0 0 34 ILMI DOWN
> > ATM1/0/3 0 5 PVC ATM2/0/0 0 43 QSAAL DOWN
> > ATM1/0/3 0 16 PVC ATM2/0/0 0 35 ILMI DOWN
> > ATM1/1/0 0 5 PVC ATM2/0/0 0 44 QSAAL DOWN
> > ATM1/1/0 0 16 PVC ATM2/0/0 0 36 ILMI DOWN
> > ATM1/1/1 0 5 PVC ATM2/0/0 0 45 QSAAL DOWN
> > ATM1/1/1 0 16 PVC ATM2/0/0 0 37 ILMI DOWN
> > ATM1/1/2 0 5 PVC ATM2/0/0 0 46 QSAAL DOWN
> > ATM1/1/2 0 16 PVC ATM2/0/0 0 38 ILMI DOWN
> > ATM1/1/3 0 5 PVC ATM2/0/0 0 47 QSAAL DOWN
> > ATM1/1/3 0 16 PVC ATM2/0/0 0 39 ILMI DOWN
> > ATM2/0/0 0 33 PVC ATM1/0/1 0 16 ILMI DOWN
> > ATM2/0/0 0 34 PVC ATM1/0/2 0 16 ILMI DOWN
> > ATM2/0/0 0 35 PVC ATM1/0/3 0 16 ILMI DOWN
> > ATM2/0/0 0 36 PVC ATM1/1/0 0 16 ILMI DOWN
> > ATM2/0/0 0 37 PVC ATM1/1/1 0 16 ILMI DOWN
> > Interface VPI VCI Type X-Interface X-VPI X-VCI Encap Status
> > ATM2/0/0 0 38 PVC ATM1/1/2 0 16 ILMI DOWN
> > ATM2/0/0 0 39 PVC ATM1/1/3 0 16 ILMI DOWN
> > ATM2/0/0 0 41 PVC ATM1/0/1 0 5 QSAAL DOWN
> > ATM2/0/0 0 42 PVC ATM1/0/2 0 5 QSAAL DOWN
> > ATM2/0/0 0 43 PVC ATM1/0/3 0 5 QSAAL DOWN
> > ATM2/0/0 0 44 PVC ATM1/1/0 0 5 QSAAL DOWN
> > ATM2/0/0 0 45 PVC ATM1/1/1 0 5 QSAAL DOWN
> > ATM2/0/0 0 46 PVC ATM1/1/2 0 5 QSAAL DOWN
> > ATM2/0/0 0 47 PVC ATM1/1/3 0 5 QSAAL DOWN
> > ATM2/0/0 0 48 PVC ATM1/0/0 0 5 QSAAL UP
> > ATM2/0/0 0 49 PVC ATM1/0/0 0 16 ILMI UP
> > ATM2/0/0 0 50 PVC NOT CONNECTED
> > ATM2/0/0 0 51 PVC NOT CONNECTED
> > ATM2/0/0 0 52 PVC NOT CONNECTED
> > ATM2/0/0 0 53 SVC ATM2/0/0 0 54 SNAP UP
> > ATM2/0/0 0 54 SVC ATM2/0/0 0 53 SNAP UP
> > ATM2/0/0 0 56 SVC ATM1/0/0 0 33 SNAP UP
> > Switch#sh atm map
> > Map list ATM2/0/0_ATM_ARP : DYNAMIC
> > arp maps to NSAP 47.0091810000000030800AF301.40000C808000.00
> > , connection up, VC 53, ATM2/0/0
> > ip 10.1.1.1 maps to NSAP 47.0091810000000030800AF301.40000C808000.00
> > , broadcast, ATM2/0/0
> > ip 10.1.1.2 maps to NSAP 47.009181000000001111111111.112222222222.00
> > , broadcast, connection up, VC 56, ATM2/0/0
> >
> > Switch#sh atm arp
> >
> > Note that a '*' next to an IP address indicates an active call
> >
> > IP Address TTL ATM Address
> > ATM2/0/0:
> > * 10.1.1.1 16:38 470091810000000030800af30140000c80800000
> > * 10.1.1.2 16:38 4700918100000000111111111111222222222200
> >
> > Switch#
> >
> >
> >
> > r7
> > =====================
> >
> >
> > interface ATM4/0
> > ip address 10.1.1.2 255.255.255.0
> > atm nsap-address 47.009181000000001111111111.112222222222.00
> > atm pvc 1 0 16 ilmi
> > atm pvc 2 0 5 qsaal
> > no atm ilmi-keepalive
> > atm arp-server nsap 47.0091810000000030800AF301.40000C808000.00
> > !
> > R7#sh atm vc
> > VCD / Peak
> Avg/Min Burst
> > Interface Name VPI VCI Type Encaps SC Kbps
> Kbps Cells
> > Sts
> > 4/0 2 0 5 PVC SAAL UBR 155000
> > UP
> > 4/0 1 0 16 PVC ILMI UBR 155000
> > UP
> > 4/0 15 0 33 SVC SNAP UBR 155000
> > UP
> > R7#sh atm map
> > Map list test : DYNAMIC
> >
> > Map list ATM4/0_ATM_ARP : DYNAMIC
> > arp maps to NSAP 47.0091810000000030800AF301.40000C808000.00
> > , connection up, VC 15, VPI 0, VCI 33, ATM4/0
> > ip 10.1.1.1 maps to NSAP 47.0091810000000030800AF301.40000C808000.00
> > , broadcast, connection up, VC 15, VPI 0, VCI 33, ATM4/0
> >
> > R7#
> >
> >
> > > -----Original Message-----
> > > From: nobody@groupstudy.com [mailto:nobody@groupstudy.com]On Behalf Of
> > > Rah Hussain
> > > Sent: Tuesday, March 26, 2002 2:23 PM
> > > To: 'ccielab@groupstudy.com'
> > > Subject: SVC add-on module
> > >
> > >
> > > On behalf of Mamoor@ieee.org <mailto:Mamoor@ieee.org>
> > >
> > >
> > > Guys,
> > > I am on a remote lab which have 5500 with ASP module + cam +
> pam.
> > > I am able to do PVC like a charm but when it comes to SVC it dont
> connect
> > > and
> > > give an error of N12 at network Side and U11 at User side.
> > >
> > > The question is do we need an add-on module to do SVC on ASP(ls1010).
> > >
> > > -Mamoor
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:57:22 GMT-3