From: Tim O'Brien (tobrien@xxxxxxxxxxxx)
Date: Mon Mar 25 2002 - 14:35:38 GMT-3
You could turn off spanning-tree.... or set the priority to 65535. And (as
far as your comment below), I believe that you can set the priority to "0"
and have it take over root from a bridge with settings to "1".
Tim
9015
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com]On Behalf Of
peter brown
Sent: Monday, March 25, 2002 5:16 PM
To: ccielab@groupstudy.com
Subject: switch not considered for root bridge
Hello,
What command do you use so that a
switch is not considered for root bridge selection.
I know if you want the switch to be considered as the root bridge for vlan 1
for example, you use, set spantree priority 1 1
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:57:22 GMT-3