From: Louis Young (tonyblair@xxxxxxxxx)
Date: Mon Mar 25 2002 - 06:52:49 GMT-3
that is the config AFTER I issued the WRITE command.
:-(
Router#wr t
Building configuration...
Current configuration : 372 bytes
!
version 12.1
service timestamps debug uptime
service timestamps log uptime
no service password-encryption
!
hostname Router
!
!
!
!
!
!
ip subnet-zero
!
!
!
!
!
!
interface Ethernet0/0
no ip address
shutdown
!
interface Serial0/0
no ip address
shutdown
no fair-queue
!
ip classless
ip http server
!
!
line con 0
line aux 0
line vty 0 4
!
no scheduler allocate
end
----- Original Message -----
From: "Louis Young" <tonyblair@etang.com>
To: <ccielab@groupstudy.com>
Sent: Monday, March 25, 2002 5:38 PM
Subject: Weird Symptom: can not enter (config-router)# mode in ISIS and OSPF ,w
hy???
> Dear all,
> I got the following phenomena during lab routers, it is a 2610,pls h
elp me out!
>
> Router(config)#
> Router(config)#router ospf 10
> Router(config)#
> 00:18:17: %OSPF-4-NORTRID: OSPF process 10 cannot start. There must be at lea
st one "up" IP interface, for OSPF to use as router ID
> Router(config)#router isis
> Router(config)#net 01.2222.2222.2222.00
> ^
> % Invalid input detected at '^' marker.
>
> Router(config)#^Z
> Router#sh ver
> 00:18:54: %SYS-5-CONFIG_I: Configured from console by console
> Cisco Internetwork Operating System Software
> IOS (tm) C2600 Software (C2600-IS-M), Version 12.1(10), RELEASE SOFTWARE (fc1
)
> Copyright (c) 1986-2001 by cisco Systems, Inc.
> Compiled Mon 06-Aug-01 23:48 by kellythw
> Image text-base: 0x80008088, data-base: 0x80CD6E7C
>
> ROM: System Bootstrap, Version 11.3(2)XA4, RELEASE SOFTWARE (fc1)
>
> Router uptime is 18 minutes
> System returned to ROM by reload
> System image file is "flash:c2600-is-mz.121-10.bin"
>
> cisco 2610 (MPC860) processor (revision 0x203) with 26624K/6144K bytes of mem
ory.
> Processor board ID JAD05270J95 (1358695238)
> M860 processor: part number 0, mask 49
> Bridging software.
> X.25 software, Version 3.0.0.
> 1 Ethernet/IEEE 802.3 interface(s)
> 1 Serial network interface(s)
> 32K bytes of non-volatile configuration memory.
> 8192K bytes of processor board System flash (Read/Write)
>
> Configuration register is 0x2102
>
>
> Thanks in advance.
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:57:21 GMT-3