From: Chua, Parry (Parry.Chua@xxxxxxxxxx)
Date: Mon Mar 25 2002 - 00:18:25 GMT-3
There is a good sample configuration at CCO,
www.cisco.com/warp/customer/459/40.html
It give serveral possible combination configuration for load sharing and load b
alancing.
Parry Chua
///////////////
-----Original Message-----
From: ying chang [mailto:ying_c@hotmail.com]
Sent: Monday, March 25, 2002 10:11 AM
To: nsalvato@cisco.com; ccielab@groupstudy.com
Subject: RE: bgp load balancing
Hi Nelson,
Not only do we have to adjust the metrics, the administrative distance also
needs to be adjusted as well so we can have two equal paths.
"maximum-paths 2" is needed, but after thinking it over, I don't think "bgp
bestpath as-path ignore" will help. Even if we ignore the as-path, the bgp
selection process will have other tie-breakers to select the best path, so
there will be only one path after the selection process, instead of the two
paths that we would like. Please correct me if I'm wrong. I'm not sure if
static route is the only choice for this question, but that's what I can
come up with and that works for now.
Thanks,
Chang
///////////
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:57:20 GMT-3