From: Louis Krucker (lkrucker@xxxxxxxxxxxxxx)
Date: Sun Mar 24 2002 - 14:33:49 GMT-3
Sorry Mamoor i was too fast:-) the problem is solved so far
But can you explain me why my saps are not advertised over wan?
The wan link was in Netw. C and the sap was in netw E2
ipx sap 4 server E2.00c0.c769.2081 451 1
ipx sap 4 server2 ABC.2222.2222.2222 452 2
ipx sap 6 fileserver E2.0000.0000.000e 456 2
the only sap advertised by eigrp over wan is the server2 sap, does somebody
know why?
wg1r3
--
| |
--
* ptmp *
S1/0
wg1r2 * * wg1r4
-- --
| | ----------Ethernet------------| |
-- --
-----Urspr|ngliche Nachricht-----
Von: Ahmed Mamoor Amimi [mailto:mamoor@ieee.org]
Gesendet: Sonntag, 24. Mdrz 2002 17:46
An: Louis Krucker; Ccielab@Groupstudy. Com
Betreff: Re: IPX Eigrp with static SAP
The only problem with ipx sap is the splite-horizon.
wg1r4 will think why should i advertise the sap entry to wg1r2 as the static
entry already comes from ehternet.
So the best solution for this is to make a loopback on wg1r4 , add that into
ipx network and make the entry like
this :
if loopback address is 4a , ipx sap 4 server 4a.2222.222.2222 1 1
This will make sure that sap is coming from loopback network and SHOULD be
advertise to ethernet and serial.
let me know if this help !
-Mamoor
----- Original Message -----
From: Louis Krucker <lkrucker@swissonline.ch>
To: Ccielab@Groupstudy. Com <ccielab@groupstudy.com>
Sent: Sunday, March 24, 2002 9:15 PM
Subject: IPX Eigrp with static SAP
> Hi folks
>
> I have following topology.
>
> wg1r3
> --
> | |
> --
> * ptmp *
> S1/0
> wg1r2 * * wg1r4
> -- --
> | | ----------Ethernet------------| |
> -- --
>
>
> I create 2 static saps on wg1r4, the saps are advertised by ipx eigrp to
> wg1r3
> but r3 dont advertide it to wg1r2 does somebody know wy?
> Split-horizon is disabled.
>
> One other problem, i dont receive saps over the ethernet link on wg1r2....
>
> Thaks for your help
>
> Louis
>
>
>
> wg1r3#sh run
> Building configuration...
>
> Current configuration:
> !
> version 12.0
> service timestamps debug uptime
> service timestamps log uptime
> no service password-encryption
> !
> hostname wg1r3
> !
> logging buffered 4096 debugging
> !
> username wg1r5 password 0 cisco
> username sunrise password 0 freesurf
> ip subnet-zero
> no ip domain-lookup
> ipx routing 0000.0000.0003
> isdn switch-type basic-net3
> !
> interface Ethernet0/0
> description VLAN A (100)
> ip address 129.45.80.49 255.255.255.252
> no ip directed-broadcast
> ipx network 2F
> !
> interface Serial0/0
> no ip address
> no ip directed-broadcast
> !
> interface BRI0/0
> description ISDN Access 6172
> ip address 129.45.80.97 255.255.255.248
> no ip directed-broadcast
> encapsulation ppp
> dialer idle-timeout 2000
> dialer map ip 129.45.80.10 name wg1r5 broadcast 6173
> dialer map ipx B.0000.0000.0005 name wg1r5 broadcast 6173
> dialer-group 1
> ipx network B
> isdn switch-type basic-net3
> ppp authentication chap pap callin
> !
>
> !
> interface Serial1/0
> description Link to R2 , R4
> bandwidth 128
> ip address 129.45.80.25 255.255.255.248
> no ip directed-broadcast
> encapsulation frame-relay
> ip ospf message-digest-key 1 md5 cisco
> ip ospf network non-broadcast
> ip ospf priority 255
> logging event subif-link-status
> logging event dlci-status-change
> ipx network C
> no ipx split-horizon eigrp 1
> frame-relay map ipx C.0000.0000.0002 120 broadcast
> frame-relay map ipx C.0000.0000.0004 140 broadcast
> frame-relay map ip 129.45.80.26 120 broadcast
> frame-relay map ip 129.45.80.27 140 broadcast
> !
> interface Serial1/0.150 point-to-point
> description Link to R5
> bandwidth 128
> ip address 129.45.80.65 255.255.255.248
> no ip directed-broadcast
> ipx network A
> frame-relay interface-dlci 150
> !
>
> router ospf 1
> router-id 129.45.80.1
> area 1 authentication message-digest
> area 3 stub no-summary
> redistribute igrp 1 metric 5000 subnets
> network 129.45.80.24 0.0.0.7 area 1
> network 129.45.80.48 0.0.0.3 area 3
> neighbor 129.45.80.27 priority 1
> neighbor 129.45.80.26 priority 1
> !
> router igrp 1
> timers basic 5 15 25 50 200
> redistribute ospf 1 metric 128 2000 200 200 1500
> passive-interface Ethernet0/0
> passive-interface Serial1/0
> network 129.45.0.0
> !
> ip classless
> !
> !
> !
> !
> ipx router eigrp 1
> network C
> network B
> network A
> network 2F
> log-neighbor-changes
> !
> !
> !
> !
>
> wg1r4>en
> wg1r4#sh ipx ser
> Codes: S - Static, P - Periodic, E - EIGRP, N - NLSP, H - Holddown, + =
> detail
> U - Per-user static
> 1 Total IPX Servers
>
> Table ordering is based on routing and server info
>
> Type Name Net Address Port Route Hops
> Itf
> S 4 server E2.00c0.c769.2081:0451 conn 1
> To0/0
> wg1r4#
> wg1r4#
> wg1r4#
> wg1r4#
> wg1r4#
> wg1r4#
> wg1r4#sh run
> Building configuration...
>
> Current configuration : 1804 bytes
> !
> version 12.2
> service timestamps debug uptime
> service timestamps log uptime
> no service password-encryption
> !
> hostname wg1r4
> !
> !
> ip subnet-zero
> !
> !
> no ip domain-lookup
> !
> ipx routing 0000.0000.0004
>
> interface Ethernet0/0
> ip address 129.45.80.34 255.255.255.248
> half-duplex
> ipx network F
> standby timers 1 2
> standby preempt
> standby 1 ip 129.45.80.35
> standby 1 timers 1 3
> standby 1 priority 150
> standby 1 preempt
> !
> interface Serial0/0
> bandwidth 128
> ip address 129.45.80.27 255.255.255.248
> encapsulation frame-relay
> ip ospf message-digest-key 1 md5 cisco
> no ip mroute-cache
> logging event subif-link-status
> logging event dlci-status-change
> ipx network C
> frame-relay map ipx C.0000.0000.0002 40 broadcast
> frame-relay map ipx C.0000.0000.0003 40 broadcast
> frame-relay map ip 129.45.80.25 40 broadcast
> frame-relay map ip 129.45.80.26 40 broadcast
> frame-relay lmi-type cisco
> !
> interface TokenRing0/0
> ip address 129.45.80.41 255.255.255.248
> ipx network E2
> ring-speed 16
> !
> router eigrp 1
> network 129.45.80.40 0.0.0.7
> no auto-summary
> no eigrp log-neighbor-changes
> !
> router ospf 1
> router-id 129.45.80.27
> log-adjacency-changes
> area 1 authentication message-digest
> network 129.45.80.24 0.0.0.7 area 1
> network 129.45.80.32 0.0.0.7 area 0
> neighbor 129.45.80.25 priority 255
> !
> router bgp 5
> no synchronization
> bgp log-neighbor-changes
> neighbor 129.45.80.33 remote-as 5
> no auto-summary
> !
> ip classless
> ip http server
> ip pim bidir-enable
> !
> !
> !
> !
> ipx router eigrp 1
> network F
> network E2
> network C
> log-neighbor-changes
> !
> !
> ipx sap 4 server E2.00c0.c769.2081 451 1
> !
> !
>
>
>
>
>
> wg1r2#sh ipx ser
> wg1r2#
> wg1r2#
> wg1r2#
> wg1r2#sh run
> Building configuration...
>
> Current configuration : 2493 bytes
> !
> version 12.2
> service timestamps debug uptime
> service timestamps log uptime
> no service password-encryption
> !
> hostname wg1r2
> !
> boot system flash:2:c3640-js-mz.122-7b.bin
> logging buffered 4096 debugging
> !
> username all
> memory-size iomem 25
> ip subnet-zero
> !
> !
> no ip domain-lookup
> !
> ipx routing 0000.0000.0002
>
>
> partition flash 2 16 16
> !
>
> !
> interface Ethernet0/1
> description VLAN B (101)
> ip address 129.45.80.1 255.255.255.248
> half-duplex
> ipx network D
> !
> interface Ethernet2/0
> description Link to R4 area 0
> ip address 129.45.80.33 255.255.255.248
> half-duplex
> ipx network F
> standby timers 1 2
> standby 1 ip 129.45.80.35
> standby 1 timers 1 3
> standby 1 priority 120
> standby 1 preempt
> !
> interface Serial2/0
> ip address 129.45.80.26 255.255.255.248
> encapsulation frame-relay
> ip ospf message-digest-key 1 md5 cisco
> ip ospf network non-broadcast
> ipx network C
> frame-relay map ipx C.0000.0000.0003 20 broadcast
> frame-relay map ipx C.0000.0000.0004 20 broadcast
> frame-relay map ip 129.45.80.25 20 broadcast
> frame-relay map ip 129.45.80.27 20 broadcast
> !
>
> !
> interface Serial2/1
> bandwidth 128
> ip address 129.45.80.57 255.255.255.248
> ipx network E
> clockrate 125000
> !
> router eigrp 1
> redistribute ospf 1 metric 128 2000 200 200 1500
> network 129.45.80.40 0.0.0.7
> network 129.45.80.56 0.0.0.3
> distance eigrp 200 200
> no auto-summary
> eigrp log-neighbor-changes
> !
> router ospf 1
> router-id 129.45.80.26
> log-adjacency-changes
> area 1 authentication message-digest
> redistribute eigrp 1 metric 5000 subnets
> network 129.45.80.0 0.0.0.7 area 2
> network 129.45.80.24 0.0.0.7 area 1
> network 129.45.80.32 0.0.0.7 area 0
> neighbor 129.45.80.25 priority 255
> !
> router bgp 5
> no synchronization
> bgp log-neighbor-changes
> neighbor 129.45.80.34 remote-as 5
> neighbor 129.45.80.34 route-reflector-client
> neighbor 129.45.80.66 remote-as 5
> no auto-summary
> !
> ip classless
> no ip http server
> ip pim bidir-enable
> !
> access-list 50 permit 129.45.80.25
> !
> !
> !
> ipx router eigrp 1
> network C
> network D
> network E
> network F
> log-neighbor-changes
> !
> !
> no ipx router rip
> !
>
>
>
> wg1r2#
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:57:20 GMT-3