From: Ahmed Mamoor Amimi (mamoor@xxxxxxxx)
Date: Sat Mar 23 2002 - 13:42:04 GMT-3
I am also interested in this thread. as i was also doing but didnt not get
through...
I tested this with DSPU but no circuit formation....
I guess this is the issue of cononical/non-cononical.
-Mamoor
----- Original Message -----
From: John Neiberger <neiby@ureach.com>
To: Lupi, Guy <Guy.Lupi@eurekaggn.com>; <Parry.Chua@compaq.com>; 'Jason
Sinclair ' <sinclairj@powertel.com.au>; ''Frank B' ' <frank@buff-net.com>
Cc: <ccielab@groupstudy.com>
Sent: Saturday, March 23, 2002 9:16 PM
Subject: Re: RE: DLSW and Source Bridge LONG
> I'm going to make a guess here. For SRB to work, the end
> devices must be aware that they are using SRB. This is
> obviously not the case with TB.
>
> In your lab, when you had your router configured for SRB, did
> you have your workstations also configured for SRB? If not,
> that might explain why your SRB setup didn't work but your TB
> setup did.
>
> I just woke up so don't blame me if I completely wrong. :-)
>
> John
>
>
>
> ---- On Sat, 23 Mar 2002, Lupi, Guy (Guy.Lupi@eurekaggn.com)
> wrote:
>
> > Ok, here it is next weekend, and I have set up this scenario
> again.
> > Here is
> > the output and config of r3 when it is NOT working:
> >
> > r3#sh conf
> > Using 960 out of 32762 bytes
> > !
> > version 12.1
> > service timestamps debug uptime
> > service timestamps log uptime
> > no service password-encryption
> > !
> > hostname r3
> > !
> > no logging console
> > !
> > !
> > !
> > !
> > !
> > ip subnet-zero
> > no ip domain-lookup
> > !
> > !
> > !
> > !
> > !
> > source-bridge ring-group 12
> > dlsw local-peer peer-id 3.3.3.3 group 83 cost 1 lf 1500
> > dlsw remote-peer 0 tcp 8.8.8.8 lf 1500
> > !
> > interface Loopback0
> > ip address 3.3.3.3 255.255.255.255
> > !
> > interface Serial0
> > ip address 3.8.3.3 255.255.255.0
> > no fair-queue
> > !
> > interface Serial1
> > no ip address
> > shutdown
> > !
> > interface TokenRing0
> > ip address 33.33.33.33 255.255.255.0
> > ring-speed 16
> > source-bridge 1 1 12
> > source-bridge spanning
> > !
> > interface BRI0
> > no ip address
> > shutdown
> > isdn x25 static-tei 0
> > !
> > router ospf 100
> > log-adjacency-changes
> > passive-interface TokenRing0
> > network 3.3.3.3 0.0.0.0 area 0
> > network 3.8.3.0 0.0.0.255 area 0
> > network 198.207.193.0 0.0.0.0 area 0
> > !
> > ip classless
> > ip http server
> > !
> > !
> > bridge 1 protocol ieee
> > !
> > line con 0
> > line aux 0
> > line vty 0 4
> > !
> > end
> >
> > r3#sh dlsw reach
> > DLSw Local MAC address reachability cache list
> > Mac Addr status Loc. port rif
> > 0000.306c.cf50 FOUND LOCAL TokenRing0
> 0690.0011.00C0
> >
> > DLSw Remote MAC address reachability cache list
> > Mac Addr status Loc. peer
> >
> > DLSw Local NetBIOS Name reachability cache list
> > NetBIOS Name status Loc. port rif
> >
> > DLSw Remote NetBIOS Name reachability cache list
> > NetBIOS Name status Loc. peer
> >
> > r3#sh dlsw peer
> > Peers: state pkts_rx pkts_tx type
> drops ckts TCP
> > uptime
> > TCP 8.8.8.8 CONNECT 38 59 conf
> 0 0 0
> > 00:11:19
> > Total number of connected peers: 1
> > Total number of connections: 1
> >
> > r3#
> >
> >
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:57:19 GMT-3